ER-EA7EGJ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ER-EA7EGJ. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1788566368	0 RX Erlang	64 TX Erlang	0 RXcount/10m	14 TXcount/10m
1788565768	0 RX Erlang	188 TX Erlang	0 RXcount/10m	37 TXcount/10m
1788565168	0 RX Erlang	70 TX Erlang	0 RXcount/10m	15 TXcount/10m
1788564568	0 RX Erlang	31 TX Erlang	0 RXcount/10m	7 TXcount/10m
1788563968	0 RX Erlang	86 TX Erlang	0 RXcount/10m	16 TXcount/10m
1788563368	0 RX Erlang	86 TX Erlang	0 RXcount/10m	14 TXcount/10m
1788562768	0 RX Erlang	43 TX Erlang	0 RXcount/10m	11 TXcount/10m
1788562168	0 RX Erlang	51 TX Erlang	0 RXcount/10m	11 TXcount/10m
1788561568	0 RX Erlang	65 TX Erlang	0 RXcount/10m	12 TXcount/10m
1788560968	0 RX Erlang	52 TX Erlang	0 RXcount/10m	11 TXcount/10m
1788560368	0 RX Erlang	39 TX Erlang	0 RXcount/10m	9 TXcount/10m
1788559768	0 RX Erlang	60 TX Erlang	0 RXcount/10m	10 TXcount/10m
1788559168	0 RX Erlang	32 TX Erlang	0 RXcount/10m	7 TXcount/10m
1788558568	0 RX Erlang	47 TX Erlang	0 RXcount/10m	11 TXcount/10m
1788557968	0 RX Erlang	65 TX Erlang	0 RXcount/10m	13 TXcount/10m
1788557368	0 RX Erlang	34 TX Erlang	0 RXcount/10m	8 TXcount/10m
1788556768	0 RX Erlang	41 TX Erlang	0 RXcount/10m	8 TXcount/10m
1788556168	0 RX Erlang	36 TX Erlang	0 RXcount/10m	5 TXcount/10m
1788555568	0 RX Erlang	26 TX Erlang	0 RXcount/10m	6 TXcount/10m
1788554968	0 RX Erlang	38 TX Erlang	0 RXcount/10m	9 TXcount/10m
1788554368	0 RX Erlang	73 TX Erlang	0 RXcount/10m	17 TXcount/10m
1788553768	0 RX Erlang	60 TX Erlang	0 RXcount/10m	14 TXcount/10m
1788553168	0 RX Erlang	62 TX Erlang	0 RXcount/10m	13 TXcount/10m
1788552568	0 RX Erlang	66 TX Erlang	0 RXcount/10m	10 TXcount/10m
1788551968	0 RX Erlang	25 TX Erlang	0 RXcount/10m	3 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)