VE7XAK-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7XAK-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*
1780851440	12.08 Volts	37.37 Deg.C
1780851400	12.14 Volts	37.85 Deg.C
1780851174	14.05 Volts	37.37 Deg.C
1780851090	12.14 Volts	37.37 Deg.C
1780851016	12.17 Volts	36.88 Deg.C
1780850986	14.14 Volts	36.88 Deg.C
1780850941	12.17 Volts	36.39 Deg.C
1780850895	12.17 Volts	36.39 Deg.C
1780850747	14.2 Volts	34.43 Deg.C
1780850705	14.17 Volts	33.45 Deg.C
1780850685	14.2 Volts	32.96 Deg.C
1780850578	14.17 Volts	30.52 Deg.C
1780850557	13.84 Volts	30.52 Deg.C
1780850522	12.14 Volts	30.03 Deg.C
1780849928	12.17 Volts	35.9 Deg.C
1780849891	12.14 Volts	35.9 Deg.C
1780849822	12.17 Volts	35.41 Deg.C
1780849682	12.11 Volts	32.96 Deg.C
1780849673	12.11 Volts	32.96 Deg.C
1780849644	14.11 Volts	32.96 Deg.C
1780849625	12.14 Volts	32.96 Deg.C
1780849605	12.14 Volts	32.48 Deg.C
1780849524	14.23 Volts	31.5 Deg.C
1780849417	12.08 Volts	30.52 Deg.C
1780849316	12.14 Volts	29.05 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0299, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)