VE2RPL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE2RPL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Batterie*	Temp Interieur*	Temp Exterieur*
1789953799	12.8 Volts	10 Deg.C	5 Deg.C
1789952898	12.78 Volts	10 Deg.C	6 Deg.C
1789951997	12.83 Volts	10 Deg.C	5.5 Deg.C
1789951095	12.83 Volts	10 Deg.C	6 Deg.C
1789950194	12.83 Volts	10 Deg.C	6 Deg.C
1789949293	12.83 Volts	10 Deg.C	6 Deg.C
1789948391	12.85 Volts	10 Deg.C	6 Deg.C
1789947490	12.85 Volts	10.5 Deg.C	6 Deg.C
1789946588	12.85 Volts	10.5 Deg.C	6 Deg.C
1789945686	12.85 Volts	10.5 Deg.C	6 Deg.C
1789943884	12.93 Volts	10.5 Deg.C	7 Deg.C
1789942983	13.01 Volts	10.5 Deg.C	7 Deg.C
1789942099	13.11 Volts	10.5 Deg.C	7 Deg.C
1789941180	13.29 Volts	11 Deg.C	7.5 Deg.C
1789940279	13.46 Volts	11 Deg.C	7.5 Deg.C
1789939377	13.77 Volts	11 Deg.C	8 Deg.C
1789937574	13.87 Volts	11 Deg.C	9.5 Deg.C
1789936670	13.8 Volts	11 Deg.C	11 Deg.C
1789935768	13.85 Volts	10.5 Deg.C	10 Deg.C
1789933964	13.85 Volts	10 Deg.C	9.5 Deg.C
1789933062	13.85 Volts	10 Deg.C	10.5 Deg.C
1789932160	13.85 Volts	9.5 Deg.C	11.5 Deg.C
1789931255	13.82 Volts	9.5 Deg.C	9 Deg.C
1789930354	13.82 Volts	9 Deg.C	10 Deg.C
1789929452	13.8 Volts	9 Deg.C	8.5 Deg.C

*Used Equation Coefficients:

Batterie: 0, 0.0255, 0

Temp Interieur: 0, 0.5, -273

Temp Exterieur: 0, 0.5, -278

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)