Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object LU2DXW-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RxTraffic* TxTraffic* RxDrop* RSSI* Voltage*
1765588567 15 Pkt 0 Pkt 54 Pkt -58 dBm 13.64 V
1765587343 19 Pkt 0 Pkt 36 Pkt -57 dBm 13.62 V
1765586118 0 Pkt 0 Pkt 0 Pkt -58 dBm 13.64 V
1765585763 14 Pkt 0 Pkt 30 Pkt -60 dBm 13.62 V
1765584540 26 Pkt 0 Pkt 18 Pkt -57 dBm 13.62 V
1765583315 33 Pkt 0 Pkt 27 Pkt -57 dBm 13.62 V
1765582089 40 Pkt 0 Pkt 16 Pkt -59 dBm 13.62 V
1765579635 38 Pkt 0 Pkt 25 Pkt -58 dBm 13.62 V
1765578407 26 Pkt 0 Pkt 27 Pkt -59 dBm 13.62 V
1765577181 13 Pkt 0 Pkt 23 Pkt -57 dBm 13.62 V
1765575957 41 Pkt 0 Pkt 19 Pkt -58 dBm 13.64 V
1765574732 34 Pkt 0 Pkt 13 Pkt -57 dBm 13.64 V
1765573505 1 Pkt 0 Pkt 0 Pkt -60 dBm 13.62 V
1765568559 29 Pkt 0 Pkt 22 Pkt -58 dBm 13.62 V
1765567333 37 Pkt 0 Pkt 21 Pkt -58 dBm 13.62 V
1765566107 40 Pkt 0 Pkt 18 Pkt -58 dBm 13.64 V
1765563655 45 Pkt 0 Pkt 12 Pkt -59 dBm 13.62 V
1765562426 42 Pkt 0 Pkt 25 Pkt -57 dBm 13.62 V
1765561200 35 Pkt 0 Pkt 17 Pkt -63 dBm 13.62 V
1765559975 36 Pkt 0 Pkt 23 Pkt -58 dBm 13.62 V
1765557541 25 Pkt 0 Pkt 17 Pkt -58 dBm 13.62 V
1765556302 39 Pkt 0 Pkt 30 Pkt -61 dBm 13.62 V
1765555077 47 Pkt 0 Pkt 23 Pkt -58 dBm 13.62 V
1765553851 29 Pkt 0 Pkt 15 Pkt -60 dBm 13.64 V
1765552624 71 Pkt 0 Pkt 8 Pkt -58 dBm 13.62 V
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)