DL1MBD-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL1MBD-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1753618602	954.4 hPa	28.5 C deg	1016.9 hPa	0 C deg
1753613567	954.8 hPa	28.1 C deg	1017.4 hPa	0 C deg
1753613567	954.8 hPa	28.1 C deg	1017.4 hPa	0 C deg
1753611767	955 hPa	27.9 C deg	1017.6 hPa	0 C deg
1753611767	955 hPa	27.9 C deg	1017.6 hPa	0 C deg
1753609967	955.2 hPa	26.9 C deg	1018.1 hPa	0 C deg
1753609967	955.2 hPa	26.9 C deg	1018.1 hPa	0 C deg
1753547270	955.3 hPa	28.7 C deg	1017.7 hPa	0 C deg
1753547270	955.3 hPa	28.7 C deg	1017.7 hPa	0 C deg
1753442761	956.6 hPa	28.3 C deg	1019.2 hPa	0 C deg
1753442761	956.6 hPa	28.3 C deg	1019.2 hPa	0 C deg
1753439161	956.9 hPa	27.9 C deg	1019.6 hPa	0 C deg
1753439161	956.9 hPa	27.9 C deg	1019.6 hPa	0 C deg
1753437361	957 hPa	27.2 C deg	1019.9 hPa	0 C deg
1753437361	957 hPa	27.2 C deg	1019.9 hPa	0 C deg
1753372721	956.1 hPa	30.7 C deg	1018.2 hPa	0 C deg
1753372721	956.1 hPa	30.7 C deg	1018.2 hPa	0 C deg
1753370921	956.1 hPa	30.6 C deg	1018.2 hPa	0 C deg
1753370921	956.1 hPa	30.6 C deg	1018.2 hPa	0 C deg
1753369121	955.8 hPa	30.6 C deg	1017.8 hPa	0 C deg
1753369121	955.8 hPa	30.6 C deg	1017.8 hPa	0 C deg
1753367321	955.7 hPa	30.6 C deg	1017.8 hPa	0 C deg
1753367321	955.7 hPa	30.6 C deg	1017.8 hPa	0 C deg
1753365521	955.8 hPa	30.6 C deg	1017.9 hPa	0 C deg
1753365521	955.8 hPa	30.6 C deg	1017.9 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)