KB4KY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KB4KY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788574995	13.5 Volt	1170 Pkt	240 Pkt	81 Pcnt
1788574098	13.5 Volt	1160 Pkt	230 Pkt	81 Pcnt
1788573194	13.5 Volt	1170 Pkt	240 Pkt	80 Pcnt
1788572290	13.5 Volt	1160 Pkt	230 Pkt	82 Pcnt
1788571389	13.5 Volt	1110 Pkt	230 Pkt	81 Pcnt
1788569588	13.5 Volt	1040 Pkt	210 Pkt	78 Pcnt
1788568685	13.5 Volt	1020 Pkt	220 Pkt	76 Pcnt
1788567787	13.5 Volt	1070 Pkt	220 Pkt	78 Pcnt
1788566884	13.5 Volt	1090 Pkt	220 Pkt	78 Pcnt
1788565986	13.5 Volt	1060 Pkt	220 Pkt	79 Pcnt
1788565084	13.5 Volt	1040 Pkt	210 Pkt	80 Pcnt
1788564186	13.5 Volt	980 Pkt	210 Pkt	80 Pcnt
1788563289	13.5 Volt	1010 Pkt	210 Pkt	80 Pcnt
1788562380	13.5 Volt	1050 Pkt	210 Pkt	80 Pcnt
1788561480	13.5 Volt	1020 Pkt	210 Pkt	78 Pcnt
1788560580	13.5 Volt	1030 Pkt	210 Pkt	77 Pcnt
1788559682	13.5 Volt	950 Pkt	200 Pkt	76 Pcnt
1788558778	13.5 Volt	910 Pkt	200 Pkt	77 Pcnt
1788557884	13.5 Volt	900 Pkt	200 Pkt	78 Pcnt
1788556074	13.5 Volt	860 Pkt	190 Pkt	78 Pcnt
1788555179	13.5 Volt	860 Pkt	190 Pkt	76 Pcnt
1788554273	13.5 Volt	870 Pkt	190 Pkt	74 Pcnt
1788553370	13.27 Volt	860 Pkt	180 Pkt	73 Pcnt
1788552472	13.5 Volt	840 Pkt	180 Pkt	72 Pcnt
1788551571	13.5 Volt	830 Pkt	180 Pkt	71 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.07715, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)