E20TWR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E20TWR-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	SUN*
1761562487	21 Pkt	15 Pkt	-14 dBm	4 %
1761561861	25 Pkt	11 Pkt	-14 dBm	9 %
1761561235	18 Pkt	14 Pkt	-13 dBm	18 %
1761560610	33 Pkt	18 Pkt	-17 dBm	23 %
1761559984	21 Pkt	12 Pkt	-12 dBm	28 %
1761559358	20 Pkt	15 Pkt	-13 dBm	33 %
1761558731	19 Pkt	16 Pkt	-14 dBm	36 %
1761558104	18 Pkt	11 Pkt	-18 dBm	39 %
1761557479	19 Pkt	13 Pkt	-18 dBm	42 %
1761556853	19 Pkt	16 Pkt	-13 dBm	45 %
1761556227	20 Pkt	8 Pkt	-17 dBm	50 %
1761555601	18 Pkt	12 Pkt	-16 dBm	50 %
1761554976	17 Pkt	14 Pkt	-16 dBm	49 %
1761554349	17 Pkt	11 Pkt	-16 dBm	51 %
1761553723	22 Pkt	17 Pkt	-15 dBm	54 %
1761553097	21 Pkt	11 Pkt	-17 dBm	53 %
1761552470	19 Pkt	11 Pkt	-19 dBm	53 %
1761551844	18 Pkt	11 Pkt	-15 dBm	51 %
1761551218	17 Pkt	11 Pkt	-15 dBm	54 %
1761550592	18 Pkt	11 Pkt	-17 dBm	58 %
1761549966	25 Pkt	14 Pkt	-17 dBm	57 %
1761549340	17 Pkt	11 Pkt	-15 dBm	54 %
1761548715	16 Pkt	11 Pkt	-16 dBm	56 %
1761548090	17 Pkt	9 Pkt	-16 dBm	60 %
1761547463	14 Pkt	14 Pkt	-15 dBm	60 %

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

SUN: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)