SP8MDH-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8MDH-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temperatura CPU*	Obciazenie CPU*
1761601205	38 Deg.C	4 %
1761600601	38 Deg.C	3 %
1761600005	36 Deg.C	3 %
1761599401	34 Deg.C	2 %
1761598805	27 Deg.C	3 %
1761394207	33 Deg.C	3 %
1761243605	43 Deg.C	4 %
1761241201	43 Deg.C	4 %
1761240605	43 Deg.C	4 %
1761240002	43 Deg.C	4 %
1761238205	42 Deg.C	3 %
1761237605	42 Deg.C	3 %
1761237001	39 Deg.C	2 %
1761235259	29 Deg.C	8 %
1761070201	46 Deg.C	4 %
1761069605	45 Deg.C	4 %
1761069002	46 Deg.C	4 %
1761068405	46 Deg.C	4 %
1761067802	45 Deg.C	4 %
1761067202	45 Deg.C	3 %
1761066605	45 Deg.C	3 %
1761066002	44 Deg.C	3 %
1761065405	42 Deg.C	3 %
1761064802	42 Deg.C	3 %
1761064204	41 Deg.C	3 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)