OK1CMJ-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK1CMJ-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkts*	RF->Inet*	DX_dist.*	live*	Temp_core*
1765569971	10 Pkts	10 Pkts	0 km	22 min.	53.33 C
1765569070	8 Pkts	8 Pkts	0 km	21 min.	53.33 C
1765568169	13 Pkts	13 Pkts	0 km	20 min.	53.33 C
1765567268	9 Pkts	9 Pkts	0 km	19 min.	53.33 C
1765566368	11 Pkts	11 Pkts	0 km	18 min.	53.33 C
1765565467	13 Pkts	13 Pkts	0 km	17 min.	53.33 C
1765564566	27 Pkts	26 Pkts	0 km	16 min.	53.33 C
1765563665	31 Pkts	31 Pkts	0 km	15 min.	53.33 C
1765562764	11 Pkts	11 Pkts	0 km	14 min.	53.33 C
1765561863	16 Pkts	16 Pkts	68 km	13 min.	53.33 C
1765560961	16 Pkts	16 Pkts	26 km	12 min.	53.33 C
1765560060	16 Pkts	16 Pkts	26 km	11 min.	53.33 C
1765559159	14 Pkts	14 Pkts	26 km	10 min.	53.33 C
1765558258	20 Pkts	20 Pkts	0 km	9 min.	53.33 C
1765557357	20 Pkts	20 Pkts	26 km	8 min.	53.33 C
1765556456	19 Pkts	19 Pkts	0 km	7 min.	53.33 C
1765555555	18 Pkts	18 Pkts	26 km	6 min.	53.33 C
1765554654	11 Pkts	11 Pkts	26 km	5 min.	53.33 C
1765553753	19 Pkts	19 Pkts	68 km	4 min.	53.33 C
1765552852	28 Pkts	28 Pkts	26 km	3 min.	53.33 C
1765551951	33 Pkts	30 Pkts	26 km	2 min.	52.22 C
1765551050	24 Pkts	18 Pkts	26 km	1 min.	53.33 C
1765550149	28 Pkts	28 Pkts	26 km	0 min.	52.22 C
1765549248	20 Pkts	20 Pkts	0 km	95 min.	53.33 C
1765548347	15 Pkts	15 Pkts	0 km	94 min.	53.33 C

*Used Equation Coefficients:

RxPkts: 0, 1, 0

RF->Inet: 0, 1, 0

DX_dist.: 0, 1, 0

live: 0, 1, 0

Temp_core: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)