KB5KSS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KB5KSS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1761650597	14.4 Volt	530 Pkt	350 Pkt	82 Pcnt
1761650297	14.4 Volt	480 Pkt	360 Pkt	83 Pcnt
1761649997	14.4 Volt	430 Pkt	350 Pkt	84 Pcnt
1761649697	14.4 Volt	620 Pkt	360 Pkt	85 Pcnt
1761649397	14.4 Volt	700 Pkt	360 Pkt	85 Pcnt
1761648797	14.4 Volt	440 Pkt	340 Pkt	85 Pcnt
1761648497	14.4 Volt	700 Pkt	340 Pkt	85 Pcnt
1761648197	14.4 Volt	510 Pkt	330 Pkt	85 Pcnt
1761647897	14.4 Volt	390 Pkt	340 Pkt	84 Pcnt
1761647597	14.4 Volt	480 Pkt	350 Pkt	84 Pcnt
1761647297	14.4 Volt	640 Pkt	360 Pkt	84 Pcnt
1761646997	14.4 Volt	440 Pkt	340 Pkt	84 Pcnt
1761646697	14.4 Volt	510 Pkt	360 Pkt	85 Pcnt
1761646397	14.4 Volt	560 Pkt	360 Pkt	85 Pcnt
1761645797	14.4 Volt	540 Pkt	360 Pkt	82 Pcnt
1761645497	14.4 Volt	510 Pkt	360 Pkt	82 Pcnt
1761645197	14.4 Volt	520 Pkt	370 Pkt	82 Pcnt
1761644897	14.4 Volt	630 Pkt	370 Pkt	82 Pcnt
1761644597	14.4 Volt	640 Pkt	370 Pkt	81 Pcnt
1761644297	14.4 Volt	580 Pkt	370 Pkt	81 Pcnt
1761643997	14.4 Volt	490 Pkt	360 Pkt	81 Pcnt
1761643697	14.4 Volt	580 Pkt	360 Pkt	81 Pcnt
1761643397	14.4 Volt	670 Pkt	370 Pkt	78 Pcnt
1761643097	14.4 Volt	570 Pkt	380 Pkt	78 Pcnt
1761642797	14.4 Volt	580 Pkt	390 Pkt	77 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)