HS1AH-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS1AH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*
1776698276	44 ug/m3	66 ug/m3	76 ug/m3	-76 dBm
1776697652	43 ug/m3	63 ug/m3	72 ug/m3	-75 dBm
1776697027	40 ug/m3	61 ug/m3	71 ug/m3	-75 dBm
1776696867	38 ug/m3	55 ug/m3	69 ug/m3	-76 dBm
1776696243	45 ug/m3	66 ug/m3	76 ug/m3	-76 dBm
1776695618	48 ug/m3	75 ug/m3	79 ug/m3	-75 dBm
1776694864	46 ug/m3	68 ug/m3	77 ug/m3	-74 dBm
1776694175	43 ug/m3	65 ug/m3	73 ug/m3	-75 dBm
1776693485	39 ug/m3	57 ug/m3	67 ug/m3	-77 dBm
1776692108	32 ug/m3	48 ug/m3	60 ug/m3	31 dBm
1776691417	33 ug/m3	48 ug/m3	61 ug/m3	-75 dBm
1776690730	35 ug/m3	57 ug/m3	71 ug/m3	-74 dBm
1776690040	33 ug/m3	48 ug/m3	60 ug/m3	-76 dBm
1776689351	31 ug/m3	44 ug/m3	53 ug/m3	-75 dBm
1776688663	32 ug/m3	48 ug/m3	62 ug/m3	-77 dBm
1776687974	47 ug/m3	74 ug/m3	79 ug/m3	31 dBm
1776687284	59 ug/m3	86 ug/m3	91 ug/m3	-73 dBm
1776686659	79 ug/m3	116 ug/m3	124 ug/m3	-76 dBm
1776686034	82 ug/m3	118 ug/m3	130 ug/m3	-77 dBm
1776685409	67 ug/m3	99 ug/m3	104 ug/m3	-77 dBm
1776684785	64 ug/m3	97 ug/m3	104 ug/m3	-77 dBm
1776684161	72 ug/m3	105 ug/m3	119 ug/m3	-77 dBm
1776684016	77 ug/m3	107 ug/m3	114 ug/m3	-78 dBm
1776683392	58 ug/m3	79 ug/m3	83 ug/m3	-77 dBm
1776682767	44 ug/m3	65 ug/m3	75 ug/m3	-75 dBm

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

SUN: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)