DL1KGT-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL1KGT-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1787578168	1013.8 hPa	26.6 C deg	41.6 %	79 -	0 C deg
1787576350	1014.2 hPa	26.5 C deg	41.5 %	82 -	0 C deg
1787574535	1014.5 hPa	26.4 C deg	41.7 %	82 -	0 C deg
1787572720	1014.9 hPa	26.3 C deg	41.7 %	82 -	0 C deg
1787570905	1015.2 hPa	26.2 C deg	41.7 %	85 -	0 C deg
1787569086	1015.5 hPa	26.2 C deg	41.7 %	90 -	0 C deg
1787567271	1016.1 hPa	26.1 C deg	42.1 %	90 -	0 C deg
1787565456	1016.5 hPa	26 C deg	42.4 %	88 -	0 C deg
1787563641	1016.8 hPa	26 C deg	42.5 %	88 -	0 C deg
1787561823	1017 hPa	25.9 C deg	42.5 %	88 -	0 C deg
1787558193	1017.3 hPa	25.9 C deg	42.5 %	87 -	0 C deg
1787556377	1017.5 hPa	25.9 C deg	42.5 %	89 -	0 C deg
1787554560	1017.8 hPa	26 C deg	42.5 %	89 -	0 C deg
1787552745	1017.8 hPa	26 C deg	42.5 %	88 -	0 C deg
1787550929	1017.8 hPa	26 C deg	42.8 %	86 -	0 C deg
1787549114	1017.8 hPa	26 C deg	44 %	84 -	0 C deg
1787547389	1017.8 hPa	26 C deg	42.5 %	88 -	0 C deg
1787543666	1017.6 hPa	26.1 C deg	42.8 %	88 -	0 C deg
1787541851	1017.9 hPa	26.1 C deg	42.9 %	87 -	0 C deg
1787540036	1018 hPa	26.1 C deg	42.9 %	86 -	0 C deg
1787538221	1018.2 hPa	26.1 C deg	43 %	86 -	0 C deg
1787536406	1018 hPa	26.2 C deg	42.9 %	85 -	0 C deg
1787534595	1018 hPa	26.2 C deg	42.9 %	85 -	0 C deg
1787532779	1018 hPa	26.2 C deg	42.9 %	84 -	0 C deg
1787530964	1018.1 hPa	26.3 C deg	42.8 %	84 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)