HS0TK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS0TK-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1787549437	57 Pkt	6 Pkt	2 Pkt	-62 dBm	15.16 V
1787548504	38 Pkt	13 Pkt	0 Pkt	-61 dBm	15.07 V
1787547573	45 Pkt	20 Pkt	0 Pkt	-60 dBm	15.16 V
1787546642	45 Pkt	7 Pkt	0 Pkt	-62 dBm	15.16 V
1787545712	55 Pkt	3 Pkt	1 Pkt	-62 dBm	15.13 V
1787544776	49 Pkt	2 Pkt	0 Pkt	-58 dBm	15.18 V
1787543843	32 Pkt	2 Pkt	0 Pkt	-59 dBm	15.07 V
1787542914	33 Pkt	2 Pkt	0 Pkt	-58 dBm	15.07 V
1787541985	50 Pkt	8 Pkt	0 Pkt	-60 dBm	15.18 V
1787541054	3 Pkt	0 Pkt	0 Pkt	-60 dBm	15.07 V
1787540063	38 Pkt	5 Pkt	1 Pkt	-64 dBm	15.16 V
1787539132	36 Pkt	2 Pkt	0 Pkt	-58 dBm	15.09 V
1787538203	46 Pkt	3 Pkt	0 Pkt	-58 dBm	15.16 V
1787537272	42 Pkt	3 Pkt	0 Pkt	-63 dBm	15.09 V
1787536343	37 Pkt	3 Pkt	0 Pkt	-62 dBm	15.09 V
1787535412	89 Pkt	3 Pkt	0 Pkt	-59 dBm	15.07 V
1787534477	140 Pkt	3 Pkt	0 Pkt	-56 dBm	15.18 V
1787533537	47 Pkt	3 Pkt	0 Pkt	-55 dBm	15.18 V
1787532608	126 Pkt	3 Pkt	0 Pkt	-52 dBm	15.18 V
1787532607	126 Pkt	3 Pkt	0 Pkt	-53 dBm	15.18 V
1787531663	191 Pkt	8 Pkt	2 Pkt	-55 dBm	15.09 V
1787530712	94 Pkt	3 Pkt	0 Pkt	-57 dBm	15.09 V
1787529776	171 Pkt	6 Pkt	1 Pkt	-54 dBm	15.18 V
1787528834	-	-	-	-	-
1787528833	137 Pkt	2 Pkt	0 Pkt	-51 dBm	15.09 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)