K7KLA-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K7KLA-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Temp*	Value3*
1753660893	12.74 Volts DC	103.77 Degrees F	297
1753656379	12.83 Volts DC	100.25 Degrees F	300
1753653680	12.86 Volts DC	97.62 Degrees F	306
1753651880	12.86 Volts DC	96.74 Degrees F	310
1753650087	12.86 Volts DC	95.86 Degrees F	311
1753649181	12.89 Volts DC	96.74 Degrees F	311
1753644658	12.83 Volts DC	94.1 Degrees F	312
1753643759	12.89 Volts DC	94.1 Degrees F	314
1753642860	12.83 Volts DC	93.22 Degrees F	310
1753640162	12.8 Volts DC	91.46 Degrees F	317
1753590606	12.49 Volts DC	101.13 Degrees F	301
1753572542	12.8 Volts DC	100.25 Degrees F	300
1753567135	12.92 Volts DC	96.74 Degrees F	310
1753559025	12.89 Volts DC	93.22 Degrees F	312
1753554529	12.86 Volts DC	89.71 Degrees F	317
1753552703	12.59 Volts DC	88.83 Degrees F	319
1753549107	12.59 Volts DC	87.95 Degrees F	319
1753545512	12.56 Volts DC	83.55 Degrees F	326
1753544613	12.52 Volts DC	82.67 Degrees F	327
1753541894	12.4 Volts DC	80.04 Degrees F	327
1753540996	12.37 Volts DC	79.16 Degrees F	331
1753532937	12.34 Volts DC	78.28 Degrees F	329
1753530190	12.34 Volts DC	80.04 Degrees F	328
1753524799	12.37 Volts DC	83.55 Degrees F	327
1753523900	12.37 Volts DC	84.43 Degrees F	326

*Used Equation Coefficients:

Battery: 0, 0.0304, 0

Temp: 0, 0.879, -459.67

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)