YO8KGA-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO8KGA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Voltage*	Rx per 10 mins*	TX per 10 mins*	Temperature*
1776660246	13.26 V	12 count/10m	4 count/10m	23.5 C
1776659640	13.29 V	8 count/10m	0 count/10m	23.63 C
1776659034	13.27 V	16 count/10m	1 count/10m	23.63 C
1776658428	13.29 V	14 count/10m	3 count/10m	23.63 C
1776657822	13.27 V	14 count/10m	1 count/10m	23.63 C
1776657216	13.28 V	16 count/10m	0 count/10m	23.63 C
1776656610	13.27 V	17 count/10m	3 count/10m	23.75 C
1776656004	13.27 V	10 count/10m	2 count/10m	23.75 C
1776655398	13.27 V	12 count/10m	1 count/10m	23.75 C
1776654792	13.27 V	12 count/10m	3 count/10m	23.75 C
1776654186	13.29 V	13 count/10m	1 count/10m	23.88 C
1776653580	13.27 V	12 count/10m	0 count/10m	23.88 C
1776652974	13.29 V	14 count/10m	2 count/10m	23.88 C
1776652373	13.29 V	11 count/10m	1 count/10m	23.88 C
1776651762	13.28 V	10 count/10m	0 count/10m	24 C
1776651156	13.27 V	12 count/10m	3 count/10m	24 C
1776650550	13.27 V	13 count/10m	2 count/10m	24 C
1776649944	13.27 V	11 count/10m	0 count/10m	24 C
1776649338	13.28 V	16 count/10m	3 count/10m	24 C
1776648732	13.27 V	11 count/10m	1 count/10m	24 C
1776648126	13.28 V	10 count/10m	0 count/10m	24 C
1776647520	13.3 V	11 count/10m	4 count/10m	24.13 C
1776646914	13.29 V	12 count/10m	2 count/10m	24.13 C
1776646308	13.28 V	13 count/10m	0 count/10m	24.13 C
1776645702	13.29 V	13 count/10m	4 count/10m	24.13 C

*Used Equation Coefficients:

Voltage: 0, 0.008, 0

Rx per 10 mins: 0, 1, 0

TX per 10 mins: 0, 1, 0

Temperature: 0, 0.125, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)