AD0ED Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AD0ED. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1780603131	14.22 Volt	230 Pkt	60 Pkt	95 Pcnt
1780602831	14.22 Volt	240 Pkt	70 Pkt	95 Pcnt
1780602535	14.22 Volt	220 Pkt	60 Pkt	96 Pcnt
1780602531	14.22 Volt	220 Pkt	60 Pkt	96 Pcnt
1780602231	14.22 Volt	240 Pkt	70 Pkt	96 Pcnt
1780601931	14.22 Volt	240 Pkt	60 Pkt	96 Pcnt
1780601631	14.22 Volt	240 Pkt	60 Pkt	96 Pcnt
1780601335	14.22 Volt	220 Pkt	60 Pkt	96 Pcnt
1780601331	14.22 Volt	220 Pkt	60 Pkt	96 Pcnt
1780601031	14.22 Volt	220 Pkt	70 Pkt	95 Pcnt
1780600735	14.22 Volt	200 Pkt	60 Pkt	96 Pcnt
1780600731	14.22 Volt	200 Pkt	60 Pkt	96 Pcnt
1780600431	14.22 Volt	210 Pkt	70 Pkt	96 Pcnt
1780600131	14.22 Volt	200 Pkt	60 Pkt	97 Pcnt
1780599831	14.22 Volt	210 Pkt	70 Pkt	97 Pcnt
1780599531	14.22 Volt	210 Pkt	70 Pkt	97 Pcnt
1780599231	14.22 Volt	220 Pkt	70 Pkt	96 Pcnt
1780598941	14.22 Volt	200 Pkt	70 Pkt	97 Pcnt
1780598931	14.22 Volt	200 Pkt	70 Pkt	97 Pcnt
1780598631	14.22 Volt	220 Pkt	70 Pkt	97 Pcnt
1780598335	14.22 Volt	210 Pkt	70 Pkt	97 Pcnt
1780598331	14.22 Volt	210 Pkt	70 Pkt	97 Pcnt
1780598031	14.22 Volt	220 Pkt	70 Pkt	96 Pcnt
1780597731	14.22 Volt	220 Pkt	70 Pkt	97 Pcnt
1780597431	14.22 Volt	240 Pkt	80 Pkt	97 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)