IZ1XBB-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ1XBB-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1765552290	12.45 Volt	570 Pkt	150 Pkt	78 Pcnt
1765551689	13.73 Volt	550 Pkt	150 Pkt	78 Pcnt
1765551089	12.68 Volt	530 Pkt	150 Pkt	79 Pcnt
1765550487	13.73 Volt	480 Pkt	140 Pkt	78 Pcnt
1765549886	13.73 Volt	490 Pkt	140 Pkt	78 Pcnt
1765549285	13.73 Volt	500 Pkt	150 Pkt	78 Pcnt
1765548685	13.73 Volt	540 Pkt	160 Pkt	82 Pcnt
1765548087	13.73 Volt	560 Pkt	160 Pkt	81 Pcnt
1765547483	13.73 Volt	580 Pkt	160 Pkt	83 Pcnt
1765546884	13.73 Volt	590 Pkt	170 Pkt	84 Pcnt
1765546283	13.73 Volt	580 Pkt	170 Pkt	84 Pcnt
1765545682	13.73 Volt	560 Pkt	160 Pkt	83 Pcnt
1765545081	13.73 Volt	510 Pkt	140 Pkt	81 Pcnt
1765544481	13.73 Volt	510 Pkt	140 Pkt	81 Pcnt
1765543299	13.73 Volt	490 Pkt	120 Pkt	81 Pcnt
1765542679	13.73 Volt	500 Pkt	110 Pkt	84 Pcnt
1765542081	13.73 Volt	530 Pkt	120 Pkt	85 Pcnt
1765541478	13.2 Volt	540 Pkt	120 Pkt	86 Pcnt
1765540877	13.73 Volt	520 Pkt	110 Pkt	86 Pcnt
1765539677	13.73 Volt	550 Pkt	120 Pkt	85 Pcnt
1765539077	13.73 Volt	540 Pkt	130 Pkt	84 Pcnt
1765538475	13.73 Volt	520 Pkt	130 Pkt	84 Pcnt
1765537874	13.73 Volt	550 Pkt	140 Pkt	85 Pcnt
1765537274	13.73 Volt	560 Pkt	140 Pkt	86 Pcnt
1765536673	13.28 Volt	560 Pkt	130 Pkt	85 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)