HB9GYR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HB9GYR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V.in*	Rx.1h*	Eff.1h*	Temp*
1761542806	14.1 Volt	260 Pkt	83 Pcnt	8 C
1761542506	14.1 Volt	260 Pkt	83 Pcnt	8 C
1761542214	14.1 Volt	230 Pkt	82 Pcnt	8 C
1761542206	14.1 Volt	230 Pkt	82 Pcnt	8 C
1761541906	14.1 Volt	250 Pkt	83 Pcnt	8 C
1761541606	14.1 Volt	250 Pkt	83 Pcnt	8 C
1761541306	14.1 Volt	240 Pkt	85 Pcnt	8 C
1761541006	14.1 Volt	240 Pkt	84 Pcnt	8 C
1761540706	14.1 Volt	230 Pkt	83 Pcnt	8.5 C
1761540408	14.1 Volt	220 Pkt	86 Pcnt	8 C
1761540406	14.1 Volt	220 Pkt	86 Pcnt	8 C
1761540106	14.1 Volt	230 Pkt	86 Pcnt	8 C
1761539806	14.1 Volt	230 Pkt	85 Pcnt	8 C
1761539506	14.1 Volt	220 Pkt	85 Pcnt	8 C
1761539206	14.1 Volt	230 Pkt	86 Pcnt	8 C
1761538906	14.1 Volt	230 Pkt	87 Pcnt	8 C
1761538612	14.1 Volt	230 Pkt	88 Pcnt	8 C
1761538606	14.1 Volt	230 Pkt	88 Pcnt	8 C
1761538306	14.1 Volt	240 Pkt	88 Pcnt	8 C
1761538006	14.1 Volt	250 Pkt	88 Pcnt	8 C
1761537706	14.1 Volt	250 Pkt	88 Pcnt	7.5 C
1761537406	14.1 Volt	240 Pkt	89 Pcnt	8 C
1761537106	14.1 Volt	240 Pkt	89 Pcnt	8 C
1761536809	14.1 Volt	230 Pkt	89 Pcnt	8.5 C
1761536806	14.1 Volt	230 Pkt	89 Pcnt	8.5 C

*Used Equation Coefficients:

V.in: 0, 0.075, 0

Rx.1h: 0, 10, 0

Dg.1h: 0, 10, 0

Eff.1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)