WP4RDA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WP4RDA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1757546546	0.43 Load	66.71 DegC	2741 Mb	2825 Pkt	2379 Pkt
1757544746	0.43 Load	68.17 DegC	2741 Mb	2808 Pkt	2353 Pkt
1757542946	0.31 Load	68.65 DegC	2740 Mb	2811 Pkt	2355 Pkt
1757541146	0.39 Load	67.19 DegC	2742 Mb	2828 Pkt	2387 Pkt
1757539346	0.34 Load	68.65 DegC	2742 Mb	2850 Pkt	2412 Pkt
1757537546	0.43 Load	68.65 DegC	2740 Mb	2815 Pkt	2356 Pkt
1757535746	0.41 Load	67.19 DegC	2741 Mb	2805 Pkt	2368 Pkt
1757533946	0.48 Load	67.68 DegC	2738 Mb	2830 Pkt	2386 Pkt
1757532146	0.42 Load	67.19 DegC	2739 Mb	2826 Pkt	2372 Pkt
1757530346	0.41 Load	67.19 DegC	2741 Mb	2831 Pkt	2378 Pkt
1757528546	0.39 Load	66.71 DegC	2741 Mb	2861 Pkt	2388 Pkt
1757526746	0.35 Load	66.22 DegC	2741 Mb	2800 Pkt	2356 Pkt
1757524946	0.43 Load	66.71 DegC	2741 Mb	2808 Pkt	2358 Pkt
1757523146	0.45 Load	64.76 DegC	2746 Mb	2808 Pkt	2364 Pkt
1757521346	0.43 Load	65.73 DegC	2744 Mb	2811 Pkt	2377 Pkt
1757519546	0.4 Load	65.24 DegC	2743 Mb	2824 Pkt	2380 Pkt
1757517746	0.41 Load	64.76 DegC	2747 Mb	2836 Pkt	2388 Pkt
1757515946	0.5 Load	64.76 DegC	2722 Mb	3776 Pkt	3220 Pkt
1757514146	0.4 Load	65.24 DegC	2748 Mb	2852 Pkt	2406 Pkt
1757512347	0.42 Load	63.3 DegC	2746 Mb	2805 Pkt	2366 Pkt
1757510546	0.41 Load	63.78 DegC	2750 Mb	2828 Pkt	2387 Pkt
1757508746	0.37 Load	62.32 DegC	2749 Mb	2834 Pkt	2400 Pkt
1757506946	0.38 Load	62.32 DegC	2750 Mb	3331 Pkt	2764 Pkt
1757428949	0.49 Load	63.3 DegC	2731 Mb	1952 Pkt	1160 Pkt
1757427149	0.44 Load	63.3 DegC	2732 Mb	1952 Pkt	1175 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)