SHERWD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SHERWD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1765582333	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	12 count/10m
1765581133	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	1 count/10m	14 count/10m
1765578733	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	15 count/10m
1765577533	0.02 Rx Erlang	0.02 Tx Erlang	23 count/10m	1 count/10m	18 count/10m
1765576333	0.01 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	9 count/10m
1765575133	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	13 count/10m
1765573933	0.03 Rx Erlang	0.02 Tx Erlang	32 count/10m	0 count/10m	22 count/10m
1765572733	0.02 Rx Erlang	0.02 Tx Erlang	22 count/10m	0 count/10m	17 count/10m
1765571533	0.02 Rx Erlang	0.02 Tx Erlang	20 count/10m	0 count/10m	16 count/10m
1765570333	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	14 count/10m
1765569133	0.02 Rx Erlang	0.02 Tx Erlang	24 count/10m	0 count/10m	19 count/10m
1765567933	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	0 count/10m	14 count/10m
1765566733	0.03 Rx Erlang	0.02 Tx Erlang	26 count/10m	1 count/10m	17 count/10m
1765565533	0.01 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	10 count/10m
1765564333	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	13 count/10m
1765563133	0.03 Rx Erlang	0.02 Tx Erlang	24 count/10m	0 count/10m	18 count/10m
1765561933	0.02 Rx Erlang	0.01 Tx Erlang	19 count/10m	0 count/10m	11 count/10m
1765560733	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	0 count/10m	15 count/10m
1765558333	0.01 Rx Erlang	0.01 Tx Erlang	15 count/10m	0 count/10m	10 count/10m
1765557133	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	2 count/10m	13 count/10m
1765555933	0.01 Rx Erlang	0.01 Tx Erlang	14 count/10m	1 count/10m	9 count/10m
1765553533	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	6 count/10m
1765552333	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	1 count/10m	11 count/10m
1765551133	0.01 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	9 count/10m
1765548733	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	6 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)