EL-CE3KA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-CE3KA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Value1*	Value2*	Value3*	Value4*
1777432487	0.02 RX Erlang	0.03 TX Erlang	7 RXcount/10m	13 TXcount/10m
1777431887	0.04 RX Erlang	0.23 TX Erlang	5 RXcount/10m	28 TXcount/10m
1777431287	0.01 RX Erlang	0.14 TX Erlang	3 RXcount/10m	29 TXcount/10m
1777430244	1 RX Erlang	0 TX Erlang	2 RXcount/10m	1 TXcount/10m
1777429644	1 RX Erlang	0 TX Erlang	2 RXcount/10m	1 TXcount/10m
1777429044	1 RX Erlang	0 TX Erlang	2 RXcount/10m	1 TXcount/10m
1777428444	0.25 RX Erlang	0.02 TX Erlang	8 RXcount/10m	8 TXcount/10m
1777427844	0.07 RX Erlang	0.01 TX Erlang	6 RXcount/10m	7 TXcount/10m
1777427244	0 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1777426644	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	8 TXcount/10m
1777426044	0 RX Erlang	0.28 TX Erlang	0 RXcount/10m	21 TXcount/10m
1777425444	0 RX Erlang	0.06 TX Erlang	0 RXcount/10m	7 TXcount/10m
1777424844	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	3 TXcount/10m
1777424244	0 RX Erlang	0.12 TX Erlang	0 RXcount/10m	3 TXcount/10m
1777423644	0 RX Erlang	0 TX Erlang	0 RXcount/10m	2 TXcount/10m
1777423044	0 RX Erlang	0.55 TX Erlang	2 RXcount/10m	30 TXcount/10m
1777422314	0 RX Erlang	0 TX Erlang	1 RXcount/10m	0 TXcount/10m
1777421714	0.01 RX Erlang	0 TX Erlang	3 RXcount/10m	0 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)