DL6MFE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL6MFE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1753644421	778.6 hPa	15.6 C deg	100 %	826.6 hPa	0 C deg
1753642615	778.7 hPa	15.6 C deg	100 %	826.6 hPa	0 C deg
1753640815	778.4 hPa	15.6 C deg	100 %	826.3 hPa	0 C deg
1753639015	777.5 hPa	15.5 C deg	100 %	825.4 hPa	0 C deg
1753637215	776.8 hPa	15.5 C deg	100 %	824.6 hPa	0 C deg
1753633619	775.7 hPa	15.4 C deg	100 %	823.5 hPa	0 C deg
1753631814	777.9 hPa	15.6 C deg	100 %	825.8 hPa	0 C deg
1753630014	778 hPa	15.6 C deg	100 %	825.9 hPa	0 C deg
1753628225	777 hPa	15.5 C deg	100 %	824.9 hPa	0 C deg
1753626414	774.8 hPa	15.4 C deg	100 %	822.5 hPa	0 C deg
1753621013	769.1 hPa	15 C deg	100 %	816.5 hPa	0 C deg
1753619213	768.8 hPa	15 C deg	100 %	816.3 hPa	0 C deg
1753615613	775.6 hPa	15.4 C deg	100 %	823.4 hPa	0 C deg
1753613821	772.3 hPa	15.2 C deg	100 %	819.9 hPa	0 C deg
1753612013	760.4 hPa	14.4 C deg	100 %	807.4 hPa	0 C deg
1753606612	785.3 hPa	15.8 C deg	0 %	833.6 hPa	0 C deg
1753482588	781.7 hPa	15.6 C deg	100 %	829.8 hPa	0 C deg
1753480787	782.1 hPa	15.6 C deg	100 %	830.3 hPa	0 C deg
1753479009	781.3 hPa	15.6 C deg	100 %	829.4 hPa	0 C deg
1753477198	780.8 hPa	15.6 C deg	100 %	828.9 hPa	0 C deg
1753475387	780.9 hPa	15.6 C deg	100 %	828.9 hPa	0 C deg
1753473587	781.3 hPa	15.6 C deg	100 %	829.4 hPa	0 C deg
1753469987	780.2 hPa	15.6 C deg	100 %	828.3 hPa	0 C deg
1753466386	778.3 hPa	15.5 C deg	100 %	826.2 hPa	0 C deg
1753464586	777.9 hPa	15.5 C deg	100 %	825.8 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)