IR3EH Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR3EH. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff*
1776687851	73 Pkt	510 Pkt	0.19 Pcnt	47 Pcnt
1776687551	82 Pkt	510 Pkt	0.19 Pcnt	47 Pcnt
1776687251	76 Pkt	530 Pkt	0.19 Pcnt	47 Pcnt
1776686951	66 Pkt	520 Pkt	0.19 Pcnt	47 Pcnt
1776686651	83 Pkt	530 Pkt	0.19 Pcnt	47 Pcnt
1776686351	78 Pkt	520 Pkt	0.19 Pcnt	47 Pcnt
1776686051	76 Pkt	520 Pkt	0.19 Pcnt	47 Pcnt
1776685751	74 Pkt	530 Pkt	0.19 Pcnt	47 Pcnt
1776685451	74 Pkt	530 Pkt	0.19 Pcnt	47 Pcnt
1776685151	86 Pkt	550 Pkt	0.19 Pcnt	47 Pcnt
1776684851	95 Pkt	540 Pkt	0.19 Pcnt	47 Pcnt
1776684551	87 Pkt	540 Pkt	0.19 Pcnt	47 Pcnt
1776684251	83 Pkt	530 Pkt	0.19 Pcnt	47 Pcnt
1776683951	79 Pkt	540 Pkt	0.19 Pcnt	47 Pcnt
1776683651	84 Pkt	560 Pkt	0.19 Pcnt	47 Pcnt
1776683351	71 Pkt	570 Pkt	0.19 Pcnt	47 Pcnt
1776683051	78 Pkt	570 Pkt	0.19 Pcnt	47 Pcnt
1776682751	83 Pkt	590 Pkt	0.19 Pcnt	47 Pcnt
1776682451	83 Pkt	590 Pkt	0.19 Pcnt	47 Pcnt
1776682151	88 Pkt	600 Pkt	0.19 Pcnt	47 Pcnt
1776681851	84 Pkt	600 Pkt	0.19 Pcnt	47 Pcnt
1776681551	73 Pkt	600 Pkt	0.19 Pcnt	47 Pcnt
1776681251	82 Pkt	610 Pkt	0.19 Pcnt	47 Pcnt
1776680951	89 Pkt	610 Pkt	0.19 Pcnt	47 Pcnt
1776680651	105 Pkt	620 Pkt	0.19 Pcnt	47 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)