ER-OK0MDV Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ER-OK0MDV. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1765551206	0 RX Erlang	0.32 TX Erlang	0 RXcount/10m	27 TXcount/10m
1765550606	0 RX Erlang	0.35 TX Erlang	0 RXcount/10m	33 TXcount/10m
1765550012	0 RX Erlang	0.27 TX Erlang	0 RXcount/10m	22 TXcount/10m
1765549406	0 RX Erlang	0.29 TX Erlang	0 RXcount/10m	26 TXcount/10m
1765548806	0 RX Erlang	0.23 TX Erlang	0 RXcount/10m	19 TXcount/10m
1765547606	0 RX Erlang	0.33 TX Erlang	0 RXcount/10m	28 TXcount/10m
1765547006	0 RX Erlang	0.27 TX Erlang	0 RXcount/10m	25 TXcount/10m
1765546406	0 RX Erlang	0.27 TX Erlang	0 RXcount/10m	22 TXcount/10m
1765545806	0 RX Erlang	0.24 TX Erlang	0 RXcount/10m	22 TXcount/10m
1765545206	0 RX Erlang	0.3 TX Erlang	0 RXcount/10m	26 TXcount/10m
1765544615	0 RX Erlang	0.29 TX Erlang	0 RXcount/10m	23 TXcount/10m
1765544006	0 RX Erlang	0.21 TX Erlang	0 RXcount/10m	18 TXcount/10m
1765543406	0 RX Erlang	0.32 TX Erlang	0 RXcount/10m	28 TXcount/10m
1765542806	0 RX Erlang	0.32 TX Erlang	0 RXcount/10m	28 TXcount/10m
1765542206	0 RX Erlang	0.29 TX Erlang	0 RXcount/10m	23 TXcount/10m
1765541606	0 RX Erlang	0.28 TX Erlang	0 RXcount/10m	23 TXcount/10m
1765541006	0 RX Erlang	0.25 TX Erlang	0 RXcount/10m	22 TXcount/10m
1765540406	0 RX Erlang	0.34 TX Erlang	0 RXcount/10m	30 TXcount/10m
1765539806	0 RX Erlang	0.26 TX Erlang	0 RXcount/10m	25 TXcount/10m
1765539206	0 RX Erlang	0.35 TX Erlang	0 RXcount/10m	31 TXcount/10m
1765538605	0 RX Erlang	0.28 TX Erlang	0 RXcount/10m	26 TXcount/10m
1765538006	0 RX Erlang	0.31 TX Erlang	0 RXcount/10m	25 TXcount/10m
1765537406	0 RX Erlang	0.37 TX Erlang	0 RXcount/10m	32 TXcount/10m
1765536805	0 RX Erlang	0.31 TX Erlang	0 RXcount/10m	27 TXcount/10m
1765536206	0 RX Erlang	0.29 TX Erlang	0 RXcount/10m	27 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)