IZ1TMF Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ1TMF. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1784675940	85 Pkt	540 Pkt	0 Pkt	1.72 Pcnt	81 Pcnt
1784675640	94 Pkt	530 Pkt	1 Pkt	1.72 Pcnt	81 Pcnt
1784675340	92 Pkt	530 Pkt	2 Pkt	1.72 Pcnt	81 Pcnt
1784675040	90 Pkt	540 Pkt	1 Pkt	1.72 Pcnt	81 Pcnt
1784674740	86 Pkt	550 Pkt	0 Pkt	1.72 Pcnt	81 Pcnt
1784674440	84 Pkt	550 Pkt	0 Pkt	1.72 Pcnt	81 Pcnt
1784674140	85 Pkt	560 Pkt	0 Pkt	1.72 Pcnt	81 Pcnt
1784673840	91 Pkt	550 Pkt	0 Pkt	1.72 Pcnt	81 Pcnt
1784673540	89 Pkt	550 Pkt	2 Pkt	1.72 Pcnt	81 Pcnt
1784673240	85 Pkt	550 Pkt	2 Pkt	1.72 Pcnt	81 Pcnt
1784672940	83 Pkt	560 Pkt	0 Pkt	1.72 Pcnt	81 Pcnt
1784672640	73 Pkt	630 Pkt	0 Pkt	1.72 Pcnt	81 Pcnt
1784672340	78 Pkt	720 Pkt	1 Pkt	1.72 Pcnt	81 Pcnt
1784672040	103 Pkt	740 Pkt	1 Pkt	1.72 Pcnt	81 Pcnt
1784671740	106 Pkt	730 Pkt	1 Pkt	1.72 Pcnt	81 Pcnt
1784671440	101 Pkt	740 Pkt	1 Pkt	1.72 Pcnt	81 Pcnt
1784671140	89 Pkt	730 Pkt	0 Pkt	1.72 Pcnt	81 Pcnt
1784670840	89 Pkt	740 Pkt	0 Pkt	1.72 Pcnt	81 Pcnt
1784670540	78 Pkt	740 Pkt	1 Pkt	1.73 Pcnt	81 Pcnt
1784670240	83 Pkt	740 Pkt	2 Pkt	1.73 Pcnt	81 Pcnt
1784669940	84 Pkt	740 Pkt	3 Pkt	1.73 Pcnt	81 Pcnt
1784669640	166 Pkt	760 Pkt	2 Pkt	1.73 Pcnt	81 Pcnt
1784669340	235 Pkt	750 Pkt	1 Pkt	1.72 Pcnt	81 Pcnt
1784669040	158 Pkt	680 Pkt	2 Pkt	1.73 Pcnt	81 Pcnt
1784668740	78 Pkt	610 Pkt	3 Pkt	1.73 Pcnt	81 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)