N7LF-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N7LF-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1777593403	14.18 Volt	410 Pkt	10 Pkt	75 Pcnt
1777593403	14.18 Volt	410 Pkt	10 Pkt	75 Pcnt
1777589803	14.18 Volt	400 Pkt	20 Pkt	76 Pcnt
1777589803	14.18 Volt	400 Pkt	20 Pkt	76 Pcnt
1777586204	14.18 Volt	370 Pkt	10 Pkt	65 Pcnt
1777586203	14.18 Volt	370 Pkt	10 Pkt	65 Pcnt
1777582604	14.18 Volt	450 Pkt	0 Pkt	69 Pcnt
1777582603	14.18 Volt	450 Pkt	0 Pkt	69 Pcnt
1777579004	14.18 Volt	470 Pkt	10 Pkt	73 Pcnt
1777579003	14.18 Volt	470 Pkt	10 Pkt	73 Pcnt
1777575404	14.18 Volt	390 Pkt	0 Pkt	73 Pcnt
1777575403	14.18 Volt	390 Pkt	0 Pkt	73 Pcnt
1777571807	14.18 Volt	360 Pkt	0 Pkt	67 Pcnt
1777571803	14.18 Volt	360 Pkt	0 Pkt	67 Pcnt
1777568204	14.18 Volt	380 Pkt	10 Pkt	71 Pcnt
1777568203	14.18 Volt	380 Pkt	10 Pkt	71 Pcnt
1777564606	14.18 Volt	340 Pkt	0 Pkt	64 Pcnt
1777564603	14.18 Volt	340 Pkt	0 Pkt	64 Pcnt
1777561004	14.18 Volt	360 Pkt	0 Pkt	68 Pcnt
1777561004	14.18 Volt	360 Pkt	0 Pkt	68 Pcnt
1777557404	14.18 Volt	240 Pkt	0 Pkt	53 Pcnt
1777557404	14.18 Volt	240 Pkt	0 Pkt	53 Pcnt
1777553804	14.18 Volt	250 Pkt	0 Pkt	63 Pcnt
1777553804	14.18 Volt	250 Pkt	0 Pkt	63 Pcnt
1777550204	14.18 Volt	250 Pkt	0 Pkt	67 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)