ON8SV-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON8SV-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1765340632	12.6 Volt	500 Pkt	160 Pkt	68 Pcnt
1765340620	12.6 Volt	500 Pkt	160 Pkt	68 Pcnt
1765337020	12.6 Volt	510 Pkt	160 Pkt	72 Pcnt
1765337020	12.6 Volt	510 Pkt	160 Pkt	72 Pcnt
1765333423	12.6 Volt	410 Pkt	140 Pkt	71 Pcnt
1765333420	12.6 Volt	410 Pkt	140 Pkt	71 Pcnt
1765329831	12.6 Volt	430 Pkt	140 Pkt	74 Pcnt
1765329820	12.6 Volt	430 Pkt	140 Pkt	74 Pcnt
1765326221	12.6 Volt	440 Pkt	150 Pkt	73 Pcnt
1765326220	12.6 Volt	440 Pkt	150 Pkt	73 Pcnt
1765322620	12.6 Volt	410 Pkt	130 Pkt	71 Pcnt
1765319022	12.6 Volt	430 Pkt	150 Pkt	74 Pcnt
1765319020	12.6 Volt	430 Pkt	150 Pkt	74 Pcnt
1765315424	12.6 Volt	360 Pkt	110 Pkt	70 Pcnt
1765315420	12.6 Volt	360 Pkt	110 Pkt	70 Pcnt
1765311826	12.6 Volt	390 Pkt	130 Pkt	70 Pcnt
1765311820	12.6 Volt	390 Pkt	130 Pkt	70 Pcnt
1765308221	12.6 Volt	360 Pkt	110 Pkt	66 Pcnt
1765308221	12.6 Volt	360 Pkt	110 Pkt	66 Pcnt
1765304624	12.6 Volt	390 Pkt	130 Pkt	67 Pcnt
1765304621	12.6 Volt	390 Pkt	130 Pkt	67 Pcnt
1765301025	12.6 Volt	420 Pkt	140 Pkt	72 Pcnt
1765301021	12.6 Volt	420 Pkt	140 Pkt	72 Pcnt
1765297424	12.6 Volt	510 Pkt	170 Pkt	71 Pcnt
1765297421	12.6 Volt	510 Pkt	170 Pkt	71 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)