KJ4SNT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KJ4SNT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1784691979	14.22 Volt	20 Pkt	18 Pcnt	1 Pkt
1784691380	14.22 Volt	10 Pkt	15 Pcnt	1 Pkt
1784691079	14.22 Volt	20 Pkt	17 Pcnt	1 Pkt
1784690180	14.22 Volt	10 Pkt	12 Pcnt	1 Pkt
1784690179	14.22 Volt	10 Pkt	12 Pcnt	1 Pkt
1784689279	14.22 Volt	20 Pkt	13 Pcnt	6 Pkt
1784688980	14.22 Volt	10 Pkt	10 Pcnt	0 Pkt
1784688379	14.22 Volt	20 Pkt	13 Pcnt	1 Pkt
1784687780	14.22 Volt	10 Pkt	10 Pcnt	0 Pkt
1784687479	14.22 Volt	20 Pkt	13 Pcnt	1 Pkt
1784686580	14.22 Volt	10 Pkt	10 Pcnt	1 Pkt
1784686579	14.22 Volt	10 Pkt	10 Pcnt	1 Pkt
1784685679	14.22 Volt	20 Pkt	15 Pcnt	8 Pkt
1784685380	14.22 Volt	10 Pkt	10 Pcnt	0 Pkt
1784684779	14.22 Volt	20 Pkt	13 Pcnt	1 Pkt
1784684180	14.22 Volt	10 Pkt	11 Pcnt	0 Pkt
1784683879	14.22 Volt	20 Pkt	15 Pcnt	1 Pkt
1784682980	14.22 Volt	10 Pkt	13 Pcnt	1 Pkt
1784682980	14.22 Volt	10 Pkt	13 Pcnt	1 Pkt
1784682080	14.22 Volt	20 Pkt	16 Pcnt	6 Pkt
1784681180	14.22 Volt	20 Pkt	16 Pcnt	1 Pkt
1784680582	14.22 Volt	10 Pkt	12 Pcnt	0 Pkt
1784680280	14.22 Volt	20 Pkt	17 Pcnt	1 Pkt
1784679382	14.22 Volt	10 Pkt	13 Pcnt	1 Pkt
1784679380	14.22 Volt	10 Pkt	13 Pcnt	1 Pkt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)