HA8BKG-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HA8BKG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RF->INET*	Repeater*	AllCount*
1773325063	12 Pkts	2 Pkts	161 Pkts
1773324463	7 Pkts	4 Pkts	162 Pkts
1773323863	7 Pkts	0 Pkts	131 Pkts
1773323263	14 Pkts	2 Pkts	159 Pkts
1773322663	18 Pkts	2 Pkts	159 Pkts
1773322063	0 Pkts	0 Pkts	139 Pkts
1773321463	6 Pkts	3 Pkts	129 Pkts
1773320863	8 Pkts	4 Pkts	142 Pkts
1773320263	2 Pkts	0 Pkts	233 Pkts
1773319663	1 Pkts	1 Pkts	12 Pkts
1773319017	8 Pkts	4 Pkts	137 Pkts
1773318417	1 Pkts	0 Pkts	144 Pkts
1773317817	1 Pkts	1 Pkts	155 Pkts
1773317218	6 Pkts	3 Pkts	139 Pkts
1773316617	3 Pkts	0 Pkts	185 Pkts
1773316018	9 Pkts	1 Pkts	117 Pkts
1773315417	13 Pkts	2 Pkts	198 Pkts
1773314817	15 Pkts	1 Pkts	175 Pkts
1773314217	19 Pkts	3 Pkts	127 Pkts
1773313617	4 Pkts	1 Pkts	189 Pkts
1773313017	4 Pkts	2 Pkts	163 Pkts
1773312417	4 Pkts	3 Pkts	110 Pkts
1773311817	11 Pkts	3 Pkts	160 Pkts
1773311217	11 Pkts	2 Pkts	148 Pkts
1773310617	14 Pkts	3 Pkts	101 Pkts

*Used Equation Coefficients:

RF->INET: 0, 1, 0

INET->RF: 0, 1, 0

Repeater: 0, 1, 0

AllCount: 0, 1, 0

AllDrop: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)