HS7BHK-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS7BHK-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1773209567	28 Pkt	13 Pkt	0 Pkt	-77 dBm	0.45 V
1773205921	16 Pkt	13 Pkt	0 Pkt	-77 dBm	0.45 V
1773202276	40 Pkt	12 Pkt	0 Pkt	-76 dBm	0.49 V
1773198629	27 Pkt	11 Pkt	0 Pkt	-77 dBm	0.49 V
1773194982	0 Pkt	0 Pkt	0 Pkt	-75 dBm	0.8 V
1773191245	85 Pkt	14 Pkt	0 Pkt	-78 dBm	0.49 V
1773187582	87 Pkt	12 Pkt	0 Pkt	-77 dBm	0.49 V
1773183911	107 Pkt	12 Pkt	0 Pkt	-75 dBm	0.49 V
1773180240	7 Pkt	0 Pkt	0 Pkt	-77 dBm	0.49 V
1773178463	90 Pkt	15 Pkt	0 Pkt	-77 dBm	0.55 V
1773174792	89 Pkt	13 Pkt	1 Pkt	-77 dBm	0.45 V
1773171120	86 Pkt	13 Pkt	0 Pkt	-76 dBm	0.45 V
1773167453	0 Pkt	0 Pkt	0 Pkt	-77 dBm	0.45 V
1773165534	86 Pkt	11 Pkt	0 Pkt	-76 dBm	0.45 V
1773161870	4 Pkt	0 Pkt	0 Pkt	-77 dBm	0.45 V
1773159294	85 Pkt	15 Pkt	0 Pkt	-77 dBm	0.43 V
1773155625	86 Pkt	15 Pkt	1 Pkt	-76 dBm	0.84 V
1773151954	97 Pkt	16 Pkt	0 Pkt	-76 dBm	0.43 V
1773148274	90 Pkt	12 Pkt	0 Pkt	-77 dBm	0.43 V
1773140777	12 Pkt	13 Pkt	0 Pkt	-75 dBm	0.43 V
1773137131	10 Pkt	13 Pkt	0 Pkt	-76 dBm	0.43 V
1773133490	17 Pkt	15 Pkt	0 Pkt	-76 dBm	0.43 V
1773129842	8 Pkt	13 Pkt	0 Pkt	-76 dBm	0.45 V
1773126202	10 Pkt	64 Pkt	0 Pkt	-75 dBm	0.45 V
1773122507	12 Pkt	12 Pkt	0 Pkt	-76 dBm	0.45 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)