DL6DBZ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL6DBZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1757474525	1003.3 hPa	26.2 C deg	41.1 %	202 -	0 C deg
1757465243	1004.2 hPa	21.3 C deg	41.8 %	236 -	0 C deg
1757463443	1004.4 hPa	21.3 C deg	41.9 %	236 -	0 C deg
1757459844	1004.6 hPa	21.6 C deg	41.3 %	236 -	0 C deg
1757454442	1005 hPa	22.3 C deg	40.6 %	226 -	0 C deg
1757448434	1005.9 hPa	24 C deg	40.3 %	210 -	0 C deg
1757440133	1005.9 hPa	30.5 C deg	32.8 %	179 -	0 C deg
1757435701	1005.7 hPa	30.5 C deg	32.9 %	179 -	0 C deg
1757390657	1005.7 hPa	25.7 C deg	35.1 %	215 -	0 C deg
1757388852	1006 hPa	27.3 C deg	33.7 %	210 -	0 C deg
1757385256	1006.4 hPa	28 C deg	33 %	200 -	0 C deg
1757383454	1006.8 hPa	28 C deg	33.2 %	201 -	0 C deg
1757379856	1007 hPa	28.1 C deg	33.3 %	200 -	0 C deg
1757376779	1007.2 hPa	28.4 C deg	33.1 %	198 -	0 C deg
1757365252	1007.8 hPa	29.5 C deg	33.3 %	183 -	0 C deg
1757357030	1007.9 hPa	32.7 C deg	31.6 %	155 -	0 C deg
1757355201	1007.5 hPa	33.9 C deg	31 %	146 -	0 C deg
1757355199	1007.5 hPa	33.9 C deg	31 %	146 -	0 C deg
1757349799	1007.3 hPa	36.7 C deg	29.5 %	126 -	0 C deg
1757340796	1007.5 hPa	34.3 C deg	32.2 %	145 -	0 C deg
1757301436	1004.5 hPa	22.3 C deg	34.9 %	248 -	0 C deg
1757299645	1004.3 hPa	22.6 C deg	34.9 %	245 -	0 C deg
1757299644	1004.3 hPa	22.6 C deg	34.9 %	245 -	0 C deg
1757295667	1004.4 hPa	23.2 C deg	34.8 %	239 -	0 C deg
1757284393	1005.1 hPa	25.7 C deg	33.7 %	218 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)