SP0LPR-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP0LPR-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1772685601	51 Deg.C	2 %
1772685002	51 Deg.C	2 %
1772684406	51 Deg.C	2 %
1772683801	51 Deg.C	2 %
1772683205	51 Deg.C	2 %
1772682601	51 Deg.C	2 %
1772682005	50 Deg.C	2 %
1772681428	50 Deg.C	2 %
1772680802	50 Deg.C	2 %
1772680205	50 Deg.C	2 %
1772679005	51 Deg.C	2 %
1772678402	50 Deg.C	2 %
1772677805	51 Deg.C	2 %
1772677202	51 Deg.C	2 %
1772676602	52 Deg.C	2 %
1772676005	51 Deg.C	2 %
1772675402	51 Deg.C	2 %
1772674805	50 Deg.C	2 %
1772674201	50 Deg.C	2 %
1772673605	51 Deg.C	2 %
1772673002	51 Deg.C	2 %
1772672404	51 Deg.C	2 %
1772671805	51 Deg.C	2 %
1772671202	51 Deg.C	2 %
1772670605	52 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)