RT9K-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object RT9K-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	A5*
1788267301	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788267001	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788266701	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788266400	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788266100	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788265800	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788265500	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788265199	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788264899	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788264599	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788264298	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788263998	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788263698	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788263398	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788263097	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788262797	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788262497	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788262218	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788261896	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788261596	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788261296	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788260995	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788260695	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788260395	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None
1788260094	12.64 Volt	0 Pkt	0 Pkt	0 Pcnt	0 None

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)