DL0HDB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL0HDB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1761468063	995 hPa	9.9 C deg	58.6 %	1010.9 hPa	0 C deg
1761468063	995 hPa	9.9 C deg	58.6 %	1010.9 hPa	0 C deg
1761466272	994.5 hPa	9.6 C deg	59.3 %	1010.4 hPa	0 C deg
1761464463	994 hPa	9.4 C deg	60.3 %	1009.9 hPa	0 C deg
1761462672	993.6 hPa	8.7 C deg	62.2 %	1009.6 hPa	0 C deg
1761462663	993.6 hPa	8.7 C deg	62.2 %	1009.6 hPa	0 C deg
1761460866	993.2 hPa	8.8 C deg	61.2 %	1009.1 hPa	0 C deg
1761455469	992.8 hPa	9.3 C deg	58 %	1008.7 hPa	0 C deg
1761455463	992.8 hPa	9.3 C deg	58 %	1008.7 hPa	0 C deg
1761453662	993.3 hPa	9.4 C deg	58.1 %	1009.2 hPa	0 C deg
1761451865	993.2 hPa	9.2 C deg	58.9 %	1009.1 hPa	0 C deg
1761450074	993.3 hPa	9.6 C deg	58.7 %	1009.3 hPa	0 C deg
1761448281	993.6 hPa	10.4 C deg	57.2 %	1009.5 hPa	0 C deg
1761446467	993.7 hPa	10.7 C deg	57.1 %	1009.6 hPa	0 C deg
1761444662	993.9 hPa	11 C deg	59.1 %	1009.8 hPa	0 C deg
1761444662	993.9 hPa	11 C deg	59.1 %	1009.8 hPa	0 C deg
1761439262	994 hPa	11.2 C deg	60.8 %	1009.8 hPa	0 C deg
1761435662	993.9 hPa	11.4 C deg	60.9 %	1009.7 hPa	0 C deg
1761433862	993.8 hPa	11.6 C deg	62.4 %	1009.6 hPa	0 C deg
1761433861	993.8 hPa	11.6 C deg	62.4 %	1009.6 hPa	0 C deg
1761430275	993.6 hPa	11.9 C deg	61.3 %	1009.4 hPa	0 C deg
1761430274	993.6 hPa	11.9 C deg	61.3 %	1009.4 hPa	0 C deg
1761428468	994 hPa	11.9 C deg	61.9 %	1009.8 hPa	0 C deg
1761428461	994 hPa	11.9 C deg	61.9 %	1009.8 hPa	0 C deg
1761419469	993.8 hPa	12.4 C deg	62.1 %	1009.6 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)