This is the latest recevied telemetry packets stored in our database for station/object KB5SQG-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Value1*
Value2*
Value3*
Value4*
Value5*
1788550156
130
72
255
181
134
1788550035
130
72
255
182
135
1788549466
130
74
255
181
134
1788549345
130
74
255
181
133
1788549224
130
74
255
180
133
1788549008
130
74
255
181
133
1788548487
130
75
255
180
134
1788548367
130
75
255
180
133
1788548175
130
74
255
180
133
1788548103
130
74
255
181
134
1788547861
130
74
255
181
134
1788547620
130
73
255
181
135
1788547035
130
90
255
184
138
1788481445
130
102
255
180
133
1788481071
130
104
255
178
131
1788480764
130
105
255
178
131
1788480718
130
104
255
179
132
1788480597
130
104
255
178
131
1788480376
130
104
255
179
132
1788479212
130
102
255
180
133
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)