YM3KC-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM3KC-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1780600768	95 Pkt	154 Pkt	3 Pkt	-18 dBm	11.94 V
1780599702	97 Pkt	147 Pkt	0 Pkt	-21 dBm	11.94 V
1780598635	89 Pkt	138 Pkt	0 Pkt	-22 dBm	11.94 V
1780597584	100 Pkt	133 Pkt	1 Pkt	-21 dBm	11.94 V
1780596537	5 Pkt	10 Pkt	0 Pkt	-19 dBm	11.94 V
1780595427	93 Pkt	127 Pkt	1 Pkt	-23 dBm	11.94 V
1780594386	10 Pkt	7 Pkt	0 Pkt	-15 dBm	11.94 V
1780593950	97 Pkt	189 Pkt	0 Pkt	-17 dBm	11.94 V
1780593950	97 Pkt	189 Pkt	0 Pkt	-20 dBm	11.94 V
1780592849	91 Pkt	190 Pkt	5 Pkt	-25 dBm	11.94 V
1780592849	91 Pkt	190 Pkt	5 Pkt	-18 dBm	11.94 V
1780591752	135 Pkt	161 Pkt	0 Pkt	-19 dBm	11.94 V
1780590665	127 Pkt	169 Pkt	2 Pkt	-24 dBm	11.94 V
1780589579	103 Pkt	160 Pkt	1 Pkt	-19 dBm	11.94 V
1780588501	109 Pkt	150 Pkt	0 Pkt	-20 dBm	11.94 V
1780586694	9 Pkt	13 Pkt	0 Pkt	-21 dBm	11.94 V
1780585558	106 Pkt	162 Pkt	0 Pkt	-20 dBm	11.94 V
1780584476	111 Pkt	135 Pkt	0 Pkt	-20 dBm	11.94 V
1780583422	4 Pkt	10 Pkt	0 Pkt	-22 dBm	11.94 V
1780582504	120 Pkt	150 Pkt	0 Pkt	-17 dBm	11.94 V
1780581428	10 Pkt	9 Pkt	0 Pkt	-19 dBm	11.94 V
1780580856	105 Pkt	160 Pkt	0 Pkt	-19 dBm	11.94 V
1780579780	105 Pkt	163 Pkt	0 Pkt	-26 dBm	11.94 V
1780578702	109 Pkt	164 Pkt	0 Pkt	-17 dBm	11.94 V
1780577620	123 Pkt	169 Pkt	1 Pkt	-19 dBm	11.94 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)