DO3AC-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DO3AC-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1761806405	983 hPa	30.1 C deg	23.4 %	1011.7 hPa	0 C deg
1761802804	981.4 hPa	30.2 C deg	23.4 %	1010 hPa	0 C deg
1761775804	976.2 hPa	30.3 C deg	23.4 %	1004.7 hPa	0 C deg
1761774024	977.1 hPa	30.3 C deg	23.4 %	1005.6 hPa	0 C deg
1761770403	977.3 hPa	30.3 C deg	23.4 %	1005.9 hPa	0 C deg
1761766806	977.5 hPa	30.3 C deg	23.3 %	1006 hPa	0 C deg
1761765004	978 hPa	30.3 C deg	23.3 %	1006.6 hPa	0 C deg
1761761402	978.8 hPa	30.2 C deg	23.3 %	1007.4 hPa	0 C deg
1761754205	979.3 hPa	30.1 C deg	23.2 %	1007.9 hPa	0 C deg
1761748801	980.5 hPa	30.2 C deg	22.9 %	1009.2 hPa	0 C deg
1761745201	981.4 hPa	30.2 C deg	22.9 %	1010.1 hPa	0 C deg
1761743410	982 hPa	30.1 C deg	23 %	1010.7 hPa	0 C deg
1761741601	982.5 hPa	30.1 C deg	22.9 %	1011.2 hPa	0 C deg
1761739801	983 hPa	30 C deg	22.9 %	1011.7 hPa	0 C deg
1761738001	983.5 hPa	30 C deg	22.9 %	1012.2 hPa	0 C deg
1761736201	983.9 hPa	29.9 C deg	22.9 %	1012.6 hPa	0 C deg
1761732601	984.8 hPa	29.9 C deg	22.9 %	1013.6 hPa	0 C deg
1761727200	985.6 hPa	29.8 C deg	22.8 %	1014.5 hPa	0 C deg
1761721800	986 hPa	29.7 C deg	22.7 %	1014.8 hPa	0 C deg
1761720000	986.1 hPa	29.7 C deg	22.7 %	1015 hPa	0 C deg
1761718200	986.1 hPa	29.7 C deg	22.7 %	1015 hPa	0 C deg
1761716400	986.1 hPa	29.7 C deg	22.7 %	1015 hPa	0 C deg
1761712800	986.4 hPa	29.8 C deg	22.6 %	1015.3 hPa	0 C deg
1761711000	986.5 hPa	29.7 C deg	22.7 %	1015.4 hPa	0 C deg
1761709200	986.3 hPa	29.7 C deg	22.7 %	1015.2 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)