EA1HJA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA1HJA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Effic*	Volt*	TxTmp*
1784671659	160 Pkts	97 Pcnt	12.28 Volt	44 C
1784671659	160 Pkts	97 Pcnt	12.28 Volt	44 C
1784670779	150 Pkts	97 Pcnt	12.28 Volt	44 C
1784670779	150 Pkts	97 Pcnt	12.28 Volt	44 C
1784669861	150 Pkts	97 Pcnt	12.28 Volt	44 C
1784669859	150 Pkts	97 Pcnt	12.28 Volt	44 C
1784668960	150 Pkts	97 Pcnt	12.28 Volt	44 C
1784668959	150 Pkts	97 Pcnt	12.28 Volt	44 C
1784668060	140 Pkts	97 Pcnt	12.28 Volt	44 C
1784668059	140 Pkts	97 Pcnt	12.28 Volt	44 C
1784667160	140 Pkts	97 Pcnt	12.28 Volt	44.5 C
1784667159	140 Pkts	97 Pcnt	12.28 Volt	44.5 C
1784666260	140 Pkts	97 Pcnt	12.28 Volt	44.5 C
1784666260	140 Pkts	97 Pcnt	12.28 Volt	44.5 C
1784665360	140 Pkts	97 Pcnt	12.28 Volt	44.5 C
1784665360	140 Pkts	97 Pcnt	12.28 Volt	44.5 C
1784664460	150 Pkts	97 Pcnt	12.28 Volt	45 C
1784663560	150 Pkts	97 Pcnt	12.28 Volt	45.5 C
1784663560	150 Pkts	97 Pcnt	12.28 Volt	45.5 C
1784662660	140 Pkts	97 Pcnt	12.28 Volt	45.5 C
1784662660	140 Pkts	97 Pcnt	12.28 Volt	45.5 C
1784661760	140 Pkts	97 Pcnt	12.28 Volt	45.5 C
1784661759	140 Pkts	97 Pcnt	12.28 Volt	45.5 C
1784660860	140 Pkts	97 Pcnt	12.28 Volt	45.5 C
1784660860	140 Pkts	97 Pcnt	12.28 Volt	45.5 C

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Effic: 0, 1, 0

Volt: 0, 0.074, 0

TxTmp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)