EA5DHO-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1781695432	0 Count	265 Count	0 Count	0 VDC	0 VDC
1781694832	0 Count	244 Count	0 Count	0 VDC	0 VDC
1781694232	0 Count	225 Count	0 Count	0 VDC	0 VDC
1781693632	0 Count	207 Count	0 Count	0 VDC	0 VDC
1781693032	0 Count	186 Count	0 Count	0 VDC	0 VDC
1781692432	0 Count	166 Count	0 Count	0 VDC	0 VDC
1781691832	0 Count	148 Count	0 Count	0 VDC	0 VDC
1781691232	0 Count	139 Count	0 Count	0 VDC	0 VDC
1781690632	0 Count	120 Count	0 Count	0 VDC	0 VDC
1781690032	0 Count	92 Count	0 Count	0 VDC	0 VDC
1781689431	0 Count	73 Count	0 Count	0 VDC	0 VDC
1781688831	0 Count	59 Count	0 Count	0 VDC	0 VDC
1781688231	0 Count	46 Count	0 Count	0 VDC	0 VDC
1781687631	0 Count	31 Count	0 Count	0 VDC	0 VDC
1781687036	0 Count	18 Count	0 Count	0 VDC	0 VDC
1781686436	0 Count	1015 Count	0 Count	0 VDC	0 VDC
1781685836	0 Count	994 Count	0 Count	0 VDC	0 VDC
1781685236	0 Count	972 Count	0 Count	0 VDC	0 VDC
1781684636	0 Count	944 Count	0 Count	0 VDC	0 VDC
1781684036	0 Count	918 Count	0 Count	0 VDC	0 VDC
1781683435	0 Count	879 Count	0 Count	0 VDC	0 VDC
1781682835	0 Count	851 Count	0 Count	0 VDC	0 VDC
1781682235	0 Count	830 Count	0 Count	0 VDC	0 VDC
1781681635	0 Count	810 Count	0 Count	0 VDC	0 VDC
1781681035	0 Count	794 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)