This is the latest recevied telemetry packets stored in our database for station/object XE2KI-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Cpu*
Temp*
FreeM*
RxP*
TxP*
1782217419
1.66 Load
40.08 DegC
320 Mb
0 Pkt
0 Pkt
1781573773
1.52 Load
54.07 DegC
85 Mb
1036 Pkt
366 Pkt
1781573474
1.6 Load
54.07 DegC
79 Mb
942 Pkt
201 Pkt
1781573173
1.7 Load
54.07 DegC
86 Mb
971 Pkt
206 Pkt
1781572873
1.63 Load
54.07 DegC
86 Mb
962 Pkt
208 Pkt
1781572574
1.62 Load
53.53 DegC
84 Mb
1025 Pkt
367 Pkt
1781572273
1.58 Load
53.53 DegC
80 Mb
952 Pkt
209 Pkt
1781571973
1.48 Load
53 DegC
82 Mb
965 Pkt
211 Pkt
1781571674
1.63 Load
53 DegC
83 Mb
1020 Pkt
294 Pkt
1781571373
1.66 Load
53 DegC
89 Mb
988 Pkt
293 Pkt
1781571074
1.61 Load
53 DegC
82 Mb
975 Pkt
209 Pkt
1781570773
1.75 Load
53.53 DegC
84 Mb
1204 Pkt
211 Pkt
1781570473
2.04 Load
55.69 DegC
79 Mb
1050 Pkt
429 Pkt
1781527801
8.86 Load
56.76 DegC
82 Mb
63378 Pkt
6646 Pkt
1781527502
1.45 Load
56.22 DegC
321 Mb
0 Pkt
0 Pkt
*Used Equation Coefficients:
Cpu: 0, 0.001, 0
Temp: 0, 0.001, 0
FreeM: 0, 1, 0
RxP: 0, 1, 0
TxP: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)