WB9TLH-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WB9TLH-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PkRec1*	Digi1h*	Eff1h*	Efftot*	Volt*
1789944381	2.4 Volt	100 Pkt	890 Pkt	73 Pcnt	14.62 None
1789940781	2.4 Volt	100 Pkt	870 Pkt	73 Pcnt	14.69 None
1789937181	2.25 Volt	90 Pkt	840 Pkt	73 Pcnt	14.69 None
1789933581	2.25 Volt	100 Pkt	850 Pkt	73 Pcnt	14.69 None
1789929981	2.4 Volt	100 Pkt	850 Pkt	73 Pcnt	14.69 None
1789926381	2.25 Volt	110 Pkt	890 Pkt	73 Pcnt	14.62 None
1789922782	2.48 Volt	90 Pkt	810 Pkt	73 Pcnt	14.69 None
1789919182	3.3 Volt	80 Pkt	910 Pkt	73 Pcnt	14.69 None
1789915582	4.28 Volt	60 Pkt	570 Pkt	73 Pcnt	14.69 None
1789911982	7.43 Volt	100 Pkt	590 Pkt	73 Pcnt	14.62 None
1789908382	9.53 Volt	140 Pkt	770 Pkt	73 Pcnt	14.62 None
1789904782	10.58 Volt	120 Pkt	780 Pkt	73 Pcnt	14.85 None
1789901182	9.53 Volt	100 Pkt	780 Pkt	73 Pcnt	14.85 None
1789897582	8.03 Volt	90 Pkt	620 Pkt	73 Pcnt	14.46 None
1789893982	7.35 Volt	100 Pkt	660 Pkt	73 Pcnt	14.85 None
1789890383	7.5 Volt	120 Pkt	730 Pkt	73 Pcnt	14.85 None
1789886783	6.75 Volt	120 Pkt	800 Pkt	73 Pcnt	14.85 None
1789883183	7.2 Volt	100 Pkt	770 Pkt	73 Pcnt	14.85 None
1789879583	6.83 Volt	100 Pkt	780 Pkt	73 Pcnt	14.93 None
1789875983	5.25 Volt	90 Pkt	660 Pkt	73 Pcnt	14.85 None
1789872383	5.78 Volt	120 Pkt	720 Pkt	73 Pcnt	14.69 None
1789868783	6.15 Volt	120 Pkt	820 Pkt	73 Pcnt	14.69 None
1789865183	6 Volt	130 Pkt	920 Pkt	73 Pcnt	14.38 None
1789861583	5.93 Volt	140 Pkt	930 Pkt	73 Pcnt	14.69 None
1789857984	3.45 Volt	110 Pkt	710 Pkt	73 Pcnt	14.3 None

*Used Equation Coefficients:

PkRec1: 0, 0.075, 0

Digi1h: 0, 10, 0

Eff1h: 0, 10, 0

Efftot: 0, 1, 0

Volt: 0, 0.079, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)