K0ATT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K0ATT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1772854992	12.45 Volt	110 Pkt	50 Pkt	51 Pcnt	76.1 F
1772854092	12.45 Volt	140 Pkt	50 Pkt	57 Pcnt	76.1 F
1772853192	12.45 Volt	170 Pkt	60 Pkt	60 Pcnt	76.1 F
1772852292	12.45 Volt	160 Pkt	60 Pkt	67 Pcnt	76.1 F
1772851392	12.45 Volt	160 Pkt	60 Pkt	70 Pcnt	76.1 F
1772850492	12.45 Volt	150 Pkt	60 Pkt	73 Pcnt	76.1 F
1772849592	12.45 Volt	120 Pkt	50 Pkt	74 Pcnt	76.1 F
1772848693	12.45 Volt	150 Pkt	60 Pkt	79 Pcnt	76.1 F
1772847793	12.45 Volt	160 Pkt	60 Pkt	78 Pcnt	76.1 F
1772846893	12.45 Volt	190 Pkt	80 Pkt	78 Pcnt	76.1 F
1772845993	12.45 Volt	210 Pkt	100 Pkt	76 Pcnt	76.1 F
1772845093	12.45 Volt	200 Pkt	100 Pkt	75 Pcnt	77 F
1772844193	12.45 Volt	250 Pkt	100 Pkt	79 Pcnt	77 F
1772843293	12.45 Volt	230 Pkt	90 Pkt	80 Pcnt	77 F
1772842393	12.38 Volt	220 Pkt	80 Pkt	79 Pcnt	77 F
1772840593	12.45 Volt	210 Pkt	90 Pkt	75 Pcnt	77 F
1772839693	12.45 Volt	200 Pkt	80 Pkt	72 Pcnt	77 F
1772838793	12.45 Volt	180 Pkt	70 Pkt	70 Pcnt	77 F
1772837893	12.45 Volt	190 Pkt	70 Pkt	73 Pcnt	77.9 F
1772836993	12.45 Volt	180 Pkt	70 Pkt	72 Pcnt	77 F
1772836093	12.45 Volt	200 Pkt	70 Pkt	71 Pcnt	77 F
1772835193	12.45 Volt	220 Pkt	80 Pkt	73 Pcnt	77 F
1772834293	12.45 Volt	200 Pkt	70 Pkt	72 Pcnt	77 F
1772833393	12.45 Volt	200 Pkt	70 Pkt	72 Pcnt	77 F
1772832493	12.38 Volt	180 Pkt	60 Pkt	74 Pcnt	77 F

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)