This is the latest recevied telemetry packets stored in our database for station/object SR7BKI. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Avg 10m*
Avg 10m*
RxPkts*
IGateDropRx*
TxPkts*
1782411816
0.05 Rx Erlang
0.02 Tx Erlang
42 count/10m
0 count/10m
19 count/10m
1782407018
0.04 Rx Erlang
0.02 Tx Erlang
37 count/10m
0 count/10m
19 count/10m
1782391416
0.03 Rx Erlang
0.01 Tx Erlang
26 count/10m
0 count/10m
12 count/10m
1782378216
0.04 Rx Erlang
0.02 Tx Erlang
42 count/10m
0 count/10m
20 count/10m
1782371016
0.02 Rx Erlang
0.01 Tx Erlang
25 count/10m
0 count/10m
13 count/10m
1782366216
0.03 Rx Erlang
0.02 Tx Erlang
32 count/10m
1 count/10m
17 count/10m
1782357816
0.02 Rx Erlang
0.02 Tx Erlang
21 count/10m
0 count/10m
16 count/10m
1782350616
0.01 Rx Erlang
0.01 Tx Erlang
13 count/10m
0 count/10m
9 count/10m
1782337416
0.02 Rx Erlang
0.01 Tx Erlang
13 count/10m
0 count/10m
8 count/10m
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)