ZL1AOR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ZL1AOR-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1788649407	13.65 Volt	190 Pkt	50 Pkt	69 Pcnt
1788648805	13.58 Volt	260 Pkt	70 Pkt	73 Pcnt
1788648207	13.58 Volt	250 Pkt	70 Pkt	72 Pcnt
1788647603	13.65 Volt	260 Pkt	70 Pkt	73 Pcnt
1788647003	14.03 Volt	270 Pkt	80 Pkt	74 Pcnt
1788646405	13.58 Volt	280 Pkt	80 Pkt	74 Pcnt
1788645802	13.5 Volt	270 Pkt	70 Pkt	73 Pcnt
1788645201	13.43 Volt	230 Pkt	50 Pkt	72 Pcnt
1788644601	13.58 Volt	230 Pkt	50 Pkt	75 Pcnt
1788644000	13.5 Volt	220 Pkt	50 Pkt	75 Pcnt
1788643402	13.43 Volt	210 Pkt	50 Pkt	72 Pcnt
1788642803	13.5 Volt	200 Pkt	50 Pkt	71 Pcnt
1788642201	13.5 Volt	200 Pkt	50 Pkt	71 Pcnt
1788641600	13.95 Volt	170 Pkt	40 Pkt	69 Pcnt
1788640999	13.8 Volt	160 Pkt	40 Pkt	66 Pcnt
1788640397	13.5 Volt	170 Pkt	40 Pkt	66 Pcnt
1788639796	13.43 Volt	170 Pkt	40 Pkt	65 Pcnt
1788639199	13.35 Volt	180 Pkt	40 Pkt	67 Pcnt
1788638595	13.13 Volt	180 Pkt	40 Pkt	64 Pcnt
1788637995	13.2 Volt	170 Pkt	40 Pkt	64 Pcnt
1788637395	13.2 Volt	170 Pkt	40 Pkt	64 Pcnt
1788636793	13.13 Volt	180 Pkt	40 Pkt	66 Pcnt
1788636193	13.05 Volt	180 Pkt	40 Pkt	67 Pcnt
1788635595	12.98 Volt	180 Pkt	40 Pkt	67 Pcnt
1788634992	12.98 Volt	180 Pkt	40 Pkt	69 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, -0.3

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)