YO8M-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO8M-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1776856720	12.9 Volt	70 Pkt	60 Pkt	23 Pcnt	20.5 C
1776855819	12.9 Volt	50 Pkt	40 Pkt	21 Pcnt	20 C
1776854919	12.9 Volt	40 Pkt	10 Pkt	21 Pcnt	20 C
1776854018	12.9 Volt	40 Pkt	30 Pkt	28 Pcnt	19.5 C
1776853117	12.9 Volt	70 Pkt	60 Pkt	31 Pcnt	19 C
1776852216	12.9 Volt	20 Pkt	20 Pkt	43 Pcnt	19 C
1776851315	12.9 Volt	40 Pkt	10 Pkt	55 Pcnt	19 C
1776850414	12.9 Volt	50 Pkt	40 Pkt	56 Pcnt	17.5 C
1776849514	12.9 Volt	140 Pkt	80 Pkt	52 Pcnt	19 C
1776848613	12.9 Volt	60 Pkt	40 Pkt	39 Pcnt	17 C
1776847712	12.9 Volt	60 Pkt	10 Pkt	33 Pcnt	19 C
1776846811	12.9 Volt	30 Pkt	30 Pkt	36 Pcnt	18.5 C
1776845910	12.9 Volt	70 Pkt	60 Pkt	39 Pcnt	19 C
1776845009	12.9 Volt	50 Pkt	20 Pkt	52 Pcnt	20.5 C
1776844108	12.9 Volt	60 Pkt	20 Pkt	57 Pcnt	20.5 C
1776843208	12.9 Volt	60 Pkt	30 Pkt	64 Pcnt	20 C
1776842307	12.9 Volt	150 Pkt	100 Pkt	69 Pcnt	19.5 C
1776841406	12.9 Volt	30 Pkt	20 Pkt	63 Pcnt	18.5 C
1776840505	12.9 Volt	90 Pkt	20 Pkt	63 Pcnt	17.5 C
1776839604	12.9 Volt	60 Pkt	10 Pkt	55 Pcnt	17 C
1776838703	12.9 Volt	130 Pkt	70 Pkt	46 Pcnt	16.5 C
1776837803	12.9 Volt	30 Pkt	10 Pkt	41 Pcnt	15.5 C
1776836902	12.9 Volt	50 Pkt	10 Pkt	35 Pcnt	17 C
1776836001	12.9 Volt	10 Pkt	10 Pkt	34 Pcnt	18 C
1776835100	12.9 Volt	100 Pkt	60 Pkt	32 Pcnt	18 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)