DB0FRO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0FRO. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1765516352	0.09 Rx Erlang	0.04 Tx Erlang	65 count/10m	9 count/10m	26 count/10m
1765515152	0.09 Rx Erlang	0.03 Tx Erlang	62 count/10m	9 count/10m	19 count/10m
1765513952	0.09 Rx Erlang	0.03 Tx Erlang	63 count/10m	8 count/10m	23 count/10m
1765512752	0.09 Rx Erlang	0.03 Tx Erlang	68 count/10m	6 count/10m	25 count/10m
1765511552	0.08 Rx Erlang	0.03 Tx Erlang	56 count/10m	9 count/10m	22 count/10m
1765510352	0.09 Rx Erlang	0.03 Tx Erlang	72 count/10m	12 count/10m	24 count/10m
1765509152	0.09 Rx Erlang	0.03 Tx Erlang	64 count/10m	8 count/10m	22 count/10m
1765507952	0.07 Rx Erlang	0.03 Tx Erlang	60 count/10m	8 count/10m	22 count/10m
1765506752	0.08 Rx Erlang	0.02 Tx Erlang	58 count/10m	8 count/10m	19 count/10m
1765505552	0.1 Rx Erlang	0.03 Tx Erlang	79 count/10m	6 count/10m	28 count/10m
1765504352	0.1 Rx Erlang	0.03 Tx Erlang	70 count/10m	3 count/10m	24 count/10m
1765503152	0.12 Rx Erlang	0.03 Tx Erlang	73 count/10m	1 count/10m	23 count/10m
1765501952	0.13 Rx Erlang	0.03 Tx Erlang	63 count/10m	7 count/10m	20 count/10m
1765500752	0.06 Rx Erlang	0.02 Tx Erlang	48 count/10m	0 count/10m	18 count/10m
1765499552	0.06 Rx Erlang	0.02 Tx Erlang	49 count/10m	0 count/10m	16 count/10m
1765498352	0.06 Rx Erlang	0.03 Tx Erlang	53 count/10m	0 count/10m	21 count/10m
1765497152	0.07 Rx Erlang	0.03 Tx Erlang	55 count/10m	1 count/10m	23 count/10m
1765495968	0.06 Rx Erlang	0.02 Tx Erlang	51 count/10m	0 count/10m	19 count/10m
1765494752	0.07 Rx Erlang	0.02 Tx Erlang	52 count/10m	0 count/10m	18 count/10m
1765493552	0.08 Rx Erlang	0.03 Tx Erlang	64 count/10m	1 count/10m	22 count/10m
1765492352	0.06 Rx Erlang	0.02 Tx Erlang	52 count/10m	2 count/10m	16 count/10m
1765491152	0.06 Rx Erlang	0.03 Tx Erlang	53 count/10m	0 count/10m	18 count/10m
1765489952	0.08 Rx Erlang	0.03 Tx Erlang	64 count/10m	0 count/10m	24 count/10m
1765488760	0.07 Rx Erlang	0.03 Tx Erlang	51 count/10m	2 count/10m	20 count/10m
1765487552	0.07 Rx Erlang	0.03 Tx Erlang	62 count/10m	1 count/10m	22 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)