IZ2UQD-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ2UQD-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	Dg1h*	Eff1h*
1776659083	27 Pkt	130 Pkt	8 Pkt	30 Pkt	86 Pcnt
1776654579	26 Pkt	120 Pkt	8 Pkt	30 Pkt	90 Pcnt
1776652778	20 Pkt	130 Pkt	7 Pkt	30 Pkt	86 Pcnt
1776651877	27 Pkt	120 Pkt	8 Pkt	30 Pkt	86 Pcnt
1776650976	28 Pkt	120 Pkt	8 Pkt	30 Pkt	86 Pcnt
1776649174	18 Pkt	120 Pkt	8 Pkt	30 Pkt	88 Pcnt
1776647373	28 Pkt	120 Pkt	8 Pkt	30 Pkt	92 Pcnt
1776646472	20 Pkt	120 Pkt	8 Pkt	30 Pkt	90 Pcnt
1776645571	20 Pkt	130 Pkt	8 Pkt	30 Pkt	90 Pcnt
1776644670	28 Pkt	130 Pkt	8 Pkt	30 Pkt	90 Pcnt
1776643770	26 Pkt	130 Pkt	8 Pkt	30 Pkt	88 Pcnt
1776641067	23 Pkt	130 Pkt	8 Pkt	30 Pkt	89 Pcnt
1776639266	23 Pkt	130 Pkt	8 Pkt	30 Pkt	91 Pcnt
1776638365	16 Pkt	130 Pkt	8 Pkt	30 Pkt	93 Pcnt
1776624853	25 Pkt	120 Pkt	8 Pkt	30 Pkt	93 Pcnt
1776614043	23 Pkt	120 Pkt	8 Pkt	30 Pkt	84 Pcnt
1776612242	22 Pkt	110 Pkt	8 Pkt	30 Pkt	84 Pcnt
1776605035	21 Pkt	120 Pkt	7 Pkt	30 Pkt	79 Pcnt
1776592424	25 Pkt	120 Pkt	8 Pkt	30 Pkt	85 Pcnt
1776589722	21 Pkt	130 Pkt	8 Pkt	30 Pkt	87 Pcnt
1776527567	40 Pkt	150 Pkt	8 Pkt	30 Pkt	54 Pcnt
1776522162	29 Pkt	140 Pkt	7 Pkt	30 Pkt	76 Pcnt
1776505948	35 Pkt	200 Pkt	16 Pkt	70 Pkt	90 Pcnt
1776505047	34 Pkt	200 Pkt	16 Pkt	70 Pkt	88 Pcnt
1776497841	49 Pkt	210 Pkt	29 Pkt	100 Pkt	90 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)