TYHEE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TYHEE. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Temp*	Dg1h*	Eff1h*
1757776141	13.03 Volt	21.5 C	150 Pkt	82 Pcnt
1757774341	13.03 Volt	22 C	130 Pkt	85 Pcnt
1757772542	13.03 Volt	22 C	140 Pkt	86 Pcnt
1757768942	13.03 Volt	22 C	100 Pkt	91 Pcnt
1757767143	13.03 Volt	22.5 C	100 Pkt	89 Pcnt
1757765342	13.03 Volt	22.5 C	100 Pkt	90 Pcnt
1757763542	13.03 Volt	23 C	100 Pkt	92 Pcnt
1757761742	13.03 Volt	23 C	100 Pkt	93 Pcnt
1757758142	13.03 Volt	23.5 C	100 Pkt	89 Pcnt
1757756342	13.03 Volt	23.5 C	100 Pkt	91 Pcnt
1757754542	13.03 Volt	24 C	100 Pkt	91 Pcnt
1757752742	12.95 Volt	24 C	100 Pkt	92 Pcnt
1757747344	13.03 Volt	24.5 C	100 Pkt	92 Pcnt
1757745542	13.03 Volt	24 C	110 Pkt	92 Pcnt
1757743742	13.03 Volt	24.5 C	100 Pkt	91 Pcnt
1757741944	13.03 Volt	24.5 C	100 Pkt	91 Pcnt
1757740142	13.03 Volt	24.5 C	100 Pkt	91 Pcnt
1757736543	13.03 Volt	24.5 C	100 Pkt	91 Pcnt
1757734743	13.03 Volt	24 C	110 Pkt	89 Pcnt
1757732943	13.03 Volt	23.5 C	110 Pkt	86 Pcnt
1757731143	13.03 Volt	24.5 C	110 Pkt	86 Pcnt
1757729343	13.03 Volt	24 C	100 Pkt	87 Pcnt
1757727544	13.03 Volt	23.5 C	100 Pkt	89 Pcnt
1757725743	13.03 Volt	24 C	100 Pkt	88 Pcnt
1757722143	13.03 Volt	23.5 C	100 Pkt	87 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, -0.1

Temp: 0, 0.5, -71

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)