OK1LOL-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK1LOL-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1772450976	13.58 Volt	400 Pkt	130 Pkt	61 Pcnt
1772450677	13.43 Volt	390 Pkt	120 Pkt	61 Pcnt
1772450676	13.43 Volt	390 Pkt	120 Pkt	61 Pcnt
1772450077	13.58 Volt	390 Pkt	120 Pkt	62 Pcnt
1772450076	13.58 Volt	390 Pkt	120 Pkt	62 Pcnt
1772449776	13.58 Volt	380 Pkt	110 Pkt	61 Pcnt
1772449478	13.58 Volt	390 Pkt	120 Pkt	61 Pcnt
1772449476	13.58 Volt	390 Pkt	120 Pkt	61 Pcnt
1772449176	13.58 Volt	390 Pkt	120 Pkt	61 Pcnt
1772448877	13.58 Volt	390 Pkt	130 Pkt	60 Pcnt
1772448876	13.58 Volt	390 Pkt	130 Pkt	60 Pcnt
1772448277	13.58 Volt	430 Pkt	150 Pkt	61 Pcnt
1772448276	13.58 Volt	430 Pkt	150 Pkt	61 Pcnt
1772447377	13.58 Volt	480 Pkt	160 Pkt	60 Pcnt
1772447077	13.58 Volt	490 Pkt	170 Pkt	60 Pcnt
1772447076	13.58 Volt	490 Pkt	170 Pkt	60 Pcnt
1772446477	13.58 Volt	500 Pkt	180 Pkt	59 Pcnt
1772446477	13.58 Volt	500 Pkt	180 Pkt	59 Pcnt
1772446177	13.58 Volt	500 Pkt	180 Pkt	59 Pcnt
1772445877	13.58 Volt	510 Pkt	190 Pkt	59 Pcnt
1772445877	13.58 Volt	510 Pkt	190 Pkt	59 Pcnt
1772445593	13.58 Volt	510 Pkt	180 Pkt	59 Pcnt
1772445277	13.58 Volt	510 Pkt	180 Pkt	59 Pcnt
1772445277	13.58 Volt	510 Pkt	180 Pkt	59 Pcnt
1772444985	13.58 Volt	510 Pkt	190 Pkt	59 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)