IV3SRD-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IV3SRD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1761550716	11.93 Volt	40 Pkt	20 Pkt	59 Pcnt
1761550416	11.93 Volt	110 Pkt	20 Pkt	59 Pcnt
1761550116	11.93 Volt	140 Pkt	20 Pkt	55 Pcnt
1761549816	11.93 Volt	130 Pkt	10 Pkt	45 Pcnt
1761549515	11.93 Volt	60 Pkt	0 Pkt	30 Pcnt
1761549215	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761548915	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761548614	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761548314	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761548014	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761547714	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761547413	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761547117	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761546813	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761546512	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761546212	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761545912	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761545612	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761545311	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761545011	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761544711	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761544410	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761544110	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761543814	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt
1761543509	11.93 Volt	0 Pkt	0 Pkt	10 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)